Recent content by I35it

does it go full droop without hitting the shock? I have JBA and they are really close to hitting on full droop.

Not sure on a place that will do it, but I could help you do it as I did mine on my truck. Not very difficult at all. I am in Farmingdale.

the 10k should be fine. You can always use a snatch block. Carry a tow strap as it can help with length if needed.

I used Jba arms, taped them, added a ball mount and good to go. So ready lift should be the same. I wouldn’t recommend the JBA as they touch the shock at full droop

Not so many options. You have to be careful cause the UCA needs to have some good spacing cause the limiting factor is the UCA when maxed out with the off road 2. The stock ones contact the shock. The ready lifts seem to be good and the icons would be as well. You just have to drill and tap for...

I know the kits say you have to run a 20" rim, but could you run an 18 with say -18 offset and be good?

What size rims do you have on?

This is something I have slowly been trying to find out. The air ride suspension looks different from a Rebel to a non-orp.

I love my soft top and have been thinking of going the same route as you so It’s good to see it on! Looking forward to more updates.