Recent content by GTG2022

See post #3 https://5thgenrams.com/community/threads/park-assist-connections.49136/#post-709491

If I'm understanding this correctly you have all the parts except the wiring from the CAN Bus, internal wiring from the module to the rear harness (under the drivers seat), internal wiring to the front harness and power. If so you will need to contact someone who can make those internal wire...

Okay. I see that you checked all of that. Maybe alpha settings? I don't know what else it could be.

Did you have to modify for LED tail lights for the BSM module or did you purchase factory ready BSM tail lights? I remember seeing a post somewhere where the pins were not completely seated and locked in the connector.

Do you have the 300A jumper wires intalled? The BSM LED tail lights work with the 300AA harnesses on the left and right side if you depin pin 8(extra ground) on the driver's side.

Thanks! I just wanted to make sure.

For those that have completed this, are these the settings that need to be changed in AlphaOBD? ECUConfig 4: Ambient Dimmer: No => Yes CBC Config I/O: Ambient Light Dimmer Wheel Input Present: No => Yes Doors: Door Map Pocket LED Present : No => Yes Doors: Door Courtesy Lamps Present: No...

If it's just the door this may be it. Part number 5YK03TX7AE from my truck:

Black/Cattle Tan 6BK033XTAG ? Or try looking here

Not bad on the price directly from the dealer. When I did my upgrade the center stack was about 40 bucks cheaper and the bezel was also 40 bucks cheaper. Both were delivered to my local dealer for free. This is one of the easiest mods I've done. There is only one alpha change you have to make...

That works for me! Mods please lock.

This is specific for 2022. I spent hours reading your thread and a few others just to find out what was missing. There are actually 5 threads that I had to comb through. That's a lot of reading. If mods feel this is redundant, please delete it or lock it.

Reserved for more info/install/pics

Reserved for more info

First off, I've learned from all the contributors who have gotten this mod documented and completed. I wanted to share my attempt with others who have a 2022 Bighorn. As we all know, parts change and we all want to know which part/part numbers work with our specific year. When I ran into issues...