Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
If I'm understanding this correctly you have all the parts except the wiring from the CAN Bus, internal wiring from the module to the rear harness (under the drivers seat), internal wiring to the front harness and power. If so you will need to contact someone who can make those internal wire...
Did you have to modify for LED tail lights for the BSM module or did you purchase factory ready BSM tail lights? I remember seeing a post somewhere where the pins were not completely seated and locked in the connector.
Do you have the 300A jumper wires intalled? The BSM LED tail lights work with the 300AA harnesses on the left and right side if you depin pin 8(extra ground) on the driver's side.
For those that have completed this, are these the settings that need to be changed in AlphaOBD?
ECUConfig 4: Ambient Dimmer: No => Yes
CBC Config I/O: Ambient Light Dimmer Wheel Input Present: No => Yes
Doors: Door Map Pocket LED Present : No => Yes
Doors: Door Courtesy Lamps Present: No...
Not bad on the price directly from the dealer. When I did my upgrade the center stack was about 40 bucks cheaper and the bezel was also 40 bucks cheaper. Both were delivered to my local dealer for free. This is one of the easiest mods I've done. There is only one alpha change you have to make...
This is specific for 2022. I spent hours reading your thread and a few others just to find out what was missing. There are actually 5 threads that I had to comb through. That's a lot of reading. If mods feel this is redundant, please delete it or lock it.
First off, I've learned from all the contributors who have gotten this mod documented and completed. I wanted to share my attempt with others who have a 2022 Bighorn. As we all know, parts change and we all want to know which part/part numbers work with our specific year. When I ran into issues...
Success at last! @Jimmy07 is the man! Thanks to his suggestion, I was able to calibrate all 4 cams in 10 maybe 15 mins! Thanks to @Stepanchina for helping enable the surround view softkey.
So just some FYI, I have a 2022 BH. I purchased the 56029964AF CVPM because it was the correct part # for...
Been re-reading over this whole thread plus a few others to see if I was missing anything... from page 1 of the how to:
VehConfig 1: Rear View Camera- NO
VehConfig 2: CHMSL Camera- NO
VehConfig 7: Full Central Vision Processing Present- YES
ECUConfig 3: Rear Camera Present- NO
Radio &...
CVPM Service calibration.
Below are the options I have. I know it's not connected now because I gave up for today. I just wanted to show what I was doing.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.