Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
**** pass-side dash. pull panel, I believe the connector is there.. it travels from sensor, along roof towards pass side, down A-pillar to connector -- I maybe wrong but from your pic it looks the 8 pin plug that lives in that location...
-=FM45=-
Those bezels have 4 nut and studs, 2 on top and 2 on bottom... then unplug sensors and the bezel has four clips but you should be able to work the bezel out without issue... enclosed is a pic for reference--
-=FM45=-
Just finished installing the Base to Premium overhead console. You'll need a conversion harness if you presently have the base unit. You can PM @Jimmy07 for harness... I grabbed the new console from eBay--Nice addition
-=FM45=-
Just an FYI,,, I believe on the Base 6, the front doors and the 3.5 dash spks are wired together back to the ANC... on the amplified systems they are individually wired to the amp.. If this is old news, just disregard :)
-=FM45=-
@brental1 .... I finally got the 2 connectors posted above, the harness isn't going to take long to make but finding the time is--- will update once complete--
-=F45=-
They are called spats--
https://www.moparpartsinc.com/a/Ram_2019_1500-57L-HEMI-V8-4WD-Big-Horn-Extended-Cab/_51505_7542406/Exterior-Ornamentation/i2379232.html
-=FM45=-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.