Recent content by ff13375

Nothing just shipped the bump stops and screws.

Sorry I just saw the post. I emailed and told them I bought the kit from a friend and he lost the bump stop.

Its the pictures actually still have a 1in rake. Message ground to center of fender

The ride is definitely stiffer but I don't mind it. To me feels like how a truck should. For now I also kept my stocked wheels. I got around 3 1/4 front bc I have a V6.

Yes add the OPR springs to the front. That will give you another 1in. So bilstein setting 5 with the opr springs should get you 3in . That's what I did

Add the OPR springs setting 5 on bilstein will get you 3in. I did do 2in spacer rear. Stock tires 275x65x18

For the guys waiting... bilsteinlifts.com has the 5100 back in stock

I know you said 33 but maybe this will help for reference. Mine are 275/65/18(32). Front Bilstein setting 5 with OPR springs. Rear Bilstein and 2in spacer. Diffently want bigger tires but only have 6k miles on the these so going to hold off.

I put a set of rough country in today. 30min start to finish wasnt to bad.

I did the bilstein 5100 setting 5 for the 2in and ORP springs for the other 1in but ended up getting 3.25. My goal was 3in total. Still waiting to see if it settled at all. I have around 300 miles on this setup. I really like it, it does ride a little stiffer but don't think its that bad.

My truck was a non OPR V6. I added OPR front springs and bilstein setting 5. I got around 3 1/4 lift.

I did a lot of looking too before I did my setup. My truck is a non orp truck. I wanted around 3in. I wanted to keep my stock wheels for now. So after reading I peiced a kit together Front OPR spring Bilstein 5100 setting 5 Mopar lift UCA Raer Bilstein 5100 Mofab 2in spacer Ready lift bump...

Before and after. 2020 ram V6 275/65/18 Front Bilstein front setting 5 Add OPR springs Mopar lift UCA Rear Bilstein shock Motofab 2in spacer Ready lift bump stop extender Front 39 3/4 Rear 40 3/4

Before and after. 2020 ram V6 stock 275/65/18 Front Bilstein front setting 5 Add OPR springs Mopar lift UCA Rear Bilstein shock Motofab 2in spacer Ready lift bump stop extender Front 39 3/4 Rear 40 3/4

As for what setting to use. Measure from the ground to the center of the fender front and back see what your differents is. Mine non ORP is 2 1/4 higher in the rear. Parts I ordered Front shooting for 3in Bilstein 5100( setting 5) OPR front springs Mopar upper control arms Rear Bilstein 5100...