Recent content by derp

pretty much. drag it across the carpet and the stone snags the doghair. pumice, being very brittle ends up breaking down into dust as it goes, but you pull off the hair from the carpets, and the dust vacuums out easily.

This seems like a problem ripe for an aftermarket solution or at the least a test. As described, the obstruction immediately below the cam blocks oil from being slung directly at the cam on the top end. A direct oil delivery from the pan or a partial flow diversion after the filter to the top...

I step by stepped through my install here: https://5thgenrams.com/community/threads/cargo-cam-input-car-pc-telemetry-project.18394/ when I activated the cargo cam feed on the head unit in software, those were the pins used. it is entirely possible and even likely that this is also the input...

I did the same, except the hdmi converter I used didn't have good overscan compensation. how did you get yours to not clip the sides and bottom of the converted NTSC output from your hdmi adapter?

now this is magic and completes the chain. 1: cargo cam input enable 2: raspi connect to cargo cam input 3: raspi screen mirror from phone 4: phone games/apps/movies playback.

that's already handled with the raspi. plex is good times and the unlimited data on the in-truck hotspot makes it awesome. I am running stock raspbian right now, but with openelec/kodi you could end up with a very nice media center build. what I don't like - using the aux cable I get hiss...

I got video and audio working and forgot to update the thread. working on HDMI pass through right now via a Raspi Capture board that is on a slow boat from china right now (literally). The Naviks will be much simpler than what I have done just from number of parts and installation effort. what...

as far as putting video on screen, I've jsut been using the composite video input till I get frustrated to the point of giving up and making my pi do android and then using that to carplay to the head unit with no quality loss. I'm not an android dev, so I'd like to stay in linux unless I have...

yes it is, parts just happen to be quite literally on a slow boat from china.

funny thing that. I want more rubber before the road and you want less. we might as well be on opposite sides of the globe for all it helps.

my opinion, if you've got some take offs just sitting around and have the question to solve, go for it. That rubber does nothing stacked in the garage. put it on the road and see how you like it. Heck, if you really want to torque the husband, put one on for one side so you can look at the...

do not F with the oil specs. You want lifter failure? because thats how you get lifter failure.

I see where you are going here. lets go with centering the rear wheel by the pumpkin, nip the axles and those brake assemblies. We'll have a hemi powered prius in no time!

cold engine washdown with low pressure (garden hose) may be in order.

Limits! memory does work to recall the last known relative position and I have had the same issue with a physically tweaked mirror not returning to the programmed spot after say a car wash. it will take the mirror back to where the motor recalled the glass being, even if that is offset from the...