Recent content by cgraydotcom

Just for information purposes. .3mm is .011”, or basically the width of 2 sheets of paper. Tolerances will probably be near +.1/-0mm on the wheel, and +0/-.1mm on the hub. They make millions of these, and the tighter the tolerance, the higher the scrap rate. The wheel bore is not a full...

Thanks bro. He’s thinking now that the truck isn’t the issue. Might be at the trailer.

I have a ‘19 and a buddy has the ‘18. He was asking about a fuse somewhere that powers one of the 7 pin plugs that may not come installed. He thought it was a separate power line for charging an emergency disconnect battery on a car hauler, and may power inside lights on an enclosed trailer...

No, no rubbing at all.

I honestly don’t know if it was needed, or actually done. I thought the $230 install was a fair price regardless, but they did say that included an alignment. I do not know how much an alignment is on it’s own.

Yes, they are the stock wheels. Including the pic of the leveling kit info. These are spacers that go on top of the strut. Not the preload version. They did cost me $230 to install and re-align.

Got the leveling kit installed yesterday.

Leveling kit installed.

There is just a tad bit of road noise. Doesn’t bother me tho.

They are 275/60R20’s.

Kudos to the Yitamotor recommendation. I went that route and saved $180. The 1 1/2” spacers fit my wheels with no modification to the lugs. Leveling kit goes on Friday.

I’m still deciding if I want the black lugnuts. I thought I did, but not minding the chrome for now. I went with the Yitamotor spacers this time. The Boras were $280, and the Yitas were $99. Exactly the same product. They did go on tight tho. The ID of the spacer goes onto the wheel hub...

Factory wheels. 275/60R20’s. 1.500” spacers.

Switched out the tires for some 275/60R20’s. Kept factory black wheels. Added 1.500” wheel spacers. Leveling kit goes on next week.

I put a 275/60R20 on mine. Got rid of the Bridgestones that came on it. Anything bigger than that starts adding dollar bills pretty quickly. Having the Motofab 2 1/2” leveling kit installed next Friday, and a set of 1 1/2” spacers too.