5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Recent content by BalckBear91

  1. BalckBear91

    Rough Country 3.5" Strut with Clayton 2.5" Rear Springs

    No, I didn't do anything with the panhard or rear links. Rear links are probably something I should be looking into. I seem to recall some discussion about rear links on this thread: https://5thgenrams.com/community/threads/clayton-offroad-2-5-jeep-gladiator-springs-on-2020-rebel.24549/
  2. BalckBear91

    3” Rough Country lift feedback

    All of the measurements are located here: https://5thgenrams.com/community/threads/rough-country-3-5-strut-with-clayton-2-5-rear-springs.32214/ Handling is great, compared with stock! I went with the 2.5" Clayton's. Still have a bit of rake.
  3. BalckBear91

    3” Rough Country lift feedback

    I installed the 3.5 RC N3 struts with RC forged upper control arms. The ride quality is great! No complaints/issues whatsoever. For the rear lift, I believe the RC kit comes with a 1" rear spacer. I would reccomend looking into the 1.5" Icon rear double rate springs or the 2.5" Clayton Offroad...
  4. BalckBear91

    Rough Country 3.5" Strut with Clayton 2.5" Rear Springs

    No, I didn't have the ORP springs either.
  5. BalckBear91

    Rough Country 3.5" Strut with Clayton 2.5" Rear Springs

    Nice! How is the ride quality? I think the nose will settle a bit in a few weeks. What were your final measurements from center of the hub to fender flare?
  6. BalckBear91

    LED Headlight Wiring Diagram?

    When you say "White Halos", are you referring to the stock DRL?
  7. BalckBear91

    Rough Country 3.5" Strut with Clayton 2.5" Rear Springs

    I recently had the following installed on my truck: - Rough Country 3.5" strut and Rough country forged upper control arms - Clayton 2.5" rear springs with RC 0-3 N3 Rear shocks Before the lift: from the center of the hub to the fender flare I was sitting 22" in the front and 23.5" in the rear...
  8. BalckBear91

    Mickey Thompson Baja Boss A/T

    I am liking them so far, they are more aggressive than I expected but they run good. They seem to be more of a Hybrid Tire in my opinion when compared to the BFG AT, or Nitto Ridge grappler. No complaints about handling so far (even in the rain at highway speeds). They do generate slite road...
  9. BalckBear91

    Clayton Offroad 2.5" Jeep Gladiator Springs on 2020 Rebel

    I ended up going with the Clayton's and i'm very happy I did! They feel a bit softer than expected when unloaded riding on the 1st/2nd spring rate, but the ride quality is phenomenal. Before the Clayton's I was sitting at 23.5" from the center of the hub to the fender flare. After installing...
  10. BalckBear91

    where in Houston to take my truck

    I decided to go with Texas Offroad and Performance in Manvel.
  11. BalckBear91

    Tires are on!...finally have all my RC 3.5" lift finished!

    Looks great! How does it ride?
  12. BalckBear91

    Mickey Thompson Baja Boss A/T

    I just ordered some 35x12.5×R20's today. I hope they run good, not to many reviews out there!
  13. BalckBear91

    RC 3.5” lift install

    Oh I reread the post, you are saying it sits 1" higher in the front with the 1" RC spacer already installed in the rear?
  14. BalckBear91

    RC 3.5” lift install

    Are you saying it sits 1" taller in the front without anything done in the back? Did you net 3.5" of total lift in the front?
Top