Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Has anyone with a 6 inch lift and 37 inch tires been able to get any mud flaps to work on the front? I would love to be able to run mud flaps again but the front wheel wells on these trucks are considerably tighter than the last generation.
Kind of an odd thing, I wonder if the Fabtech kit coming with new rear control arms is why the sway bar links are shorter. The Zone kits just have brackets for the stock rear control arms.
I glanced at the BDS website and noticed they no longer offer UCA's with the 6 inch or 4 inch lift kits, so they must know about these cases. I have Zone UCA's with my 6 inch lift and their website still shows them available with the lift kits so hopefully I'm good.
Are there any decent off road/performance shocks for our Rams with 6 inch lifts and bigger tires? I currently have a Zone 6 inch lift and 37 inch tires with Fox 2.0 rear shocks. The front is just the stock Rebel struts with 6 inch spacers from Zone, I was considering upgrading the fronts to 6...
Paid about $5,700 for my setup, don't remember the individual cost:
-Zone 6 inch lift.
-Zone heavy duty upper control arms.
-Fox Adventure Series rear shocks.
-37x12.50r18 Falken Wildpeak AT/3W Tires, 35's would be a little cheaper probably.
-18x9 +01mm offset Fuel Ammo Anthracite Wheels...
2019 Ram 1500 Rebel QC. I've got 37x12.50r18 tires on it with a max PSI of 65. I have been trying to figure the proper PSI to run them. At the moment they are at 30 in the front and 25 in the rear. I did the chalk test a few times which is how I got to those pressures before I had decent tread...
Looks like the preload spacer is installed on the struts. The truck is pretty much level. Im wondering if the rear will settle and become nose high eventually.
Rode great on the way home on the highway. Tires are set at 50 psi. I do expect a little bit of roughness but it seemed fine to me. I could tell a bit of power loss but nothing too bad with 3.92 rear end. I don't race it hard much so power loss doesn't effect me too much.
Just got the truck back from the lift install today, here is the link to the post.
https://5thgenrams.com/community/threads/ram-rebel-6-inch-lift.19918/
Here is my 2019 Ram Rebel that I just got back from being lifted today, super happy with how the look came out. Absolutely love the 18s with 37s, plenty of meat on the tires and they stick out just a hair from the fenders. The shop did have to remove my front Weathertech mudflaps and trim a...
I'll be getting a Zone 6 inch lift put on my 2019 Rebel (Coil suspension) next week and I'm wondering if I should tell the shop to leave out the included strut pre-load spacer. On Zone's website it says the truck will be nose high about a 1/2 inch due to the ORP springs. With out the pre-load...
Unless you're dead set on a 4 inch lift, I'd always do a 6 inch. I know I would always wonder what the truck would look like with a 6 inch if I originally went with a 4 inch. The price is pretty much the same plus you can always just run meaty 35's on a 6 inch instead of going all out with 37's...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.