Marine6212
Active Member
- Joined
- Aug 11, 2023
- Messages
- 103
- Reaction score
- 117
- Points
- 43
- Age
- 51
Filed insurance claim due to getting backed into in a parking lot
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
What did you do to your Ram today???
- Thread starter 19BlkRam
- Start date
boogielander
Spends too much time on here
- Joined
- Jun 29, 2022
- Messages
- 3,295
- Reaction score
- 5,328
- Points
- 113
try it next time!I have not. It'll get me through the winter then I can buy or make something new.
I did see some new products when I was picking up extra primer. I wasn't in the mental space needed to select a new product on demand.
maybe it will be the last time you worry about it hahaha
boogielander
Spends too much time on here
- Joined
- Jun 29, 2022
- Messages
- 3,295
- Reaction score
- 5,328
- Points
- 113
first time i've heard of seymour 316 lol
Paint for Metal, Stainless Steel Paint, Protective Coating
316L Stainless Steel, Polyurethane Coatings, Epoxy Coatings, High Solids Epoxy, Spray Paint, Metal Paint, Anti Rust Coatings, Anti Corrosion Coatings, Food Processing Coatings, Automotive Coatings, Industrial Coatings, Commercial Coatings, Motorsports Coatings, Structural Coatings, DIY...steel-it.com
maybe i'll give it a shot on the next truck when i do sliders!
boogielander
Spends too much time on here
- Joined
- Jun 29, 2022
- Messages
- 3,295
- Reaction score
- 5,328
- Points
- 113
damn that sucks... metal bumper time!
boogielander
Spends too much time on here
- Joined
- Jun 29, 2022
- Messages
- 3,295
- Reaction score
- 5,328
- Points
- 113
decided to take a break from BF6 (due to... this is my first high refresh rate OLED 34" curved screen... i was getting dizzy LOL) and was bored.
so ended up doing a long-overdue wash (last time I washed my M3 and the truck was August)
earlier this week, I was migrating my data from all the portable hard drives (about 12TB total) and was going through the photos from the past few years, and I missed how shiny the truck's exterior plastic trims were (bumpers and flares). So I decided to do something about it and was told to get Cerakote Trim Wipes.
Today, I was bored so... (no pic of washing the truck)
(before - front bumper was done already)
(after)
(before - it was hard to take picture with gloves on)
(after - while curing)
(after - I coated the inside of the flare too because... i was bored)
(after - rear)
(after - the flare trim was the same color as the liner before)
(after - i did the bottom piece under the bed and bumper as well)
don't know how long it well last, supposedly it is "permanent" according to Cerakote, especially with my usage. but for $17/ box of 10 i figured why not lol
so ended up doing a long-overdue wash (last time I washed my M3 and the truck was August)
earlier this week, I was migrating my data from all the portable hard drives (about 12TB total) and was going through the photos from the past few years, and I missed how shiny the truck's exterior plastic trims were (bumpers and flares). So I decided to do something about it and was told to get Cerakote Trim Wipes.
Today, I was bored so... (no pic of washing the truck)
(before - front bumper was done already)
(after)
(before - it was hard to take picture with gloves on)
(after - while curing)
(after - I coated the inside of the flare too because... i was bored)
(after - rear)
(after - the flare trim was the same color as the liner before)
(after - i did the bottom piece under the bed and bumper as well)
don't know how long it well last, supposedly it is "permanent" according to Cerakote, especially with my usage. but for $17/ box of 10 i figured why not lol
Ready Go
Ram Guru
I have the Core4x4 with JJoints, so for me, running the endlink to the outwards side of the swaybar gave a more perpendicular angle (and I reasoned more leverage on the swaybar being on the outside of the bar than the inside..probably not).
I used the aluminum spacer that came with my endlinks and put a washer on each side of it for extra thickness also.
When I mocked mine up with no spacer on top and with the endlink on the inside of the swaybar, the endlink had a lot of angle or slope to it..I like this setup better, for me.
You don't have to put a washer on the inside of your upper mount, some lube wouldn't hurt though. You can put one on the inside if you want also though.
I like to put washers on both sides of any "clearanced" sleeve in a poly bushing because I never feel like the sleeve is quite long enough from most manufacturers and a washer can help give the bushing a little "play"..but that's just me.
I'm a huge JJ fan because ALL possibility of binding is eliminated.
Last edited:
Ready Go
Ram Guru
I'm just noticing..you must have the Mopar 2" Lift?
I see that trackbar/panhard relocators in there.
I bought the relocators and hardwire kit off Ebay last year for cheap, but haven't seen the need for them yet.
Jako
Spends too much time on here
First time I heard of Steel It and researching it came up with Seymour.
Morenar
Ram Guru
I’m running the bds 6 in coilover kit
Is that enough damage to contact the insurance over? Do you plan on upgrading or going back to stock?
Not that it's any of my business
Marine6212
Active Member
- Joined
- Aug 11, 2023
- Messages
- 103
- Reaction score
- 117
- Points
- 43
- Age
- 51
Its the other ladies insurance I'm filing against, if they give me enough to upgrade the bumper I'll get a heavy duty one like she had on her jeep, 1/4" steel!Is that enough damage to contact the insurance over? Do you plan on upgrading or going back to stock?
Not that it's any of my business
CHeYeNNe71
Spends too much time on here
$600-1200 on Mopar site. There are in between, but without knowing exactly.. GUESSTIMATE
Don't forget the cost of labor and shop time, and the rental fee when they come at you with an offer of 400 bucks.
I’m over a year from using the Cerakote wipes on all my black plastic bits and it all still looks as “wet” and nice as the day I applied it. And that’s with automatic car washes at least 2x/month.
Applied it at the beginning of last summer.
Glad to be done with trim dressings that last a week and run all over.
Pictures or links?
CHeYeNNe71
Spends too much time on here
Keyword...GUESSTIMATE and only showing cost of bumperDon't forget the cost of labor and shop time, and the rental fee when they come at you with an offer of 400 bucks.
Anybody in their right mind knows there's added costs.
Last edited:
Of product? From the large jungle river store…
CERAKOTE
Ceramic Trim Coat Kit -... https://www.amazon.com/dp/B07SHJVK4G?ref=ppx_pop_mob_ap_share
It's amazing the look difference between chrome and plain black. It was worth it! Very happy with it and hood waxing
Marine6212
Active Member
- Joined
- Aug 11, 2023
- Messages
- 103
- Reaction score
- 117
- Points
- 43
- Age
- 51
Don't forget the cost of labor and shop time, and the rental fee when they come at you with an offer of 400 bucks.
I had to deal with state farm 2ish years ago when some one totaled out my 2016 Ram 1500. They definitely try to low ball you! I'm gonna talk to some adjusters and get several quotes and only give them the highest one.Keyword...GUESSTIMATE and only showing cost of bumper
I bought itOf product? From the large jungle river store…
CERAKOTECeramic Trim Coat Kit -... https://www.amazon.com/dp/B07SHJVK4G?ref=ppx_pop_mob_ap_share
Is it shiny or greasy???
