MaxTrac rear leveling kit

[JMIngrodi]

Does anyone knoe if the MaxTrac 2" rear lowering level kit drops a true 2" ?
I just measured my front and rear and Im only off by about an inch and a half, maybe 5/8.
Im gonna be real mad if I end up lower in the back. I hate that look!
I read where some guys had to cut the coils to get true level. But is that consistent? What was the starting measurement?
Thanks for any help!

 

[djevox]

It’s not lower in the back. I had them on for a month or so before I went the opposite direction and installed a lift kit. I didn’t cut any coils either.

 

[ferraiolo1]

Mine is about .25in higher in the back. Which is ok so it’s not really squatting when I put anything in the bed


Sent from my iPhone using Tapatalk

 

[djevox]

Here’s what mine looked like with the reverse level

 

[JMIngrodi]

Mine is about .25in higher in the back. Which is ok so it’s not really squatting when I put anything in the bed


Sent from my iPhone using Tapatalk

I would be ok with .25 or less. I just dont want to be lower in the back than the front.

 

[JMIngrodi]

Here’s what mine looked like with the reverse level
View attachment 110206

Whats a "reverse level"

 

[JMIngrodi]

It’s not lower in the back. I had them on for a month or so before I went the opposite direction and installed a lift kit. I didn’t cut any coils either.

Im not sure what you mean. What isnt lower in the back ?

 

[djevox]

Whats a "reverse level"

Reverse level is leaving the front stock and lowering the back 2 inches to get rid of the rake

Im not sure what you mean. What isnt lower in the back ?

I’m referring to the 2 inch rear drop springs that you mentioned in your original post that you were worried would be lower in the rear.

have you done any research yet?

 

[JMIngrodi]

Reverse level is leaving the front stock and lowering the back 2 inches to get rid of the rake

I’m referring to the 2 inch rear drop springs that you mentioned in your original post that you were worried would be lower in the rear.

have you done any research yet?

Ive only dug around here on the forum a little. Unless Im missing something, if the springs lower the rear by 2" , Im going to be sitting a half in too low in the back. So I was checking to see what everyone elses experience was.

 

[ferraiolo1]

I’ve not seen any truck in here that was lower in the back with the maxtrac progressive lowering rear springs

Sent from my iPhone using Tapatalk

 

[JMIngrodi]

Ok thanks!

 

[2020SilverMidnight]

I've had them on my truck since 1700 miles, I'm at over 27K now with no issues and it's not 100% completely a 2" drop. Mine still has about 1/2" rake. Meaning the drop was only about 1.5" for me.

 

[2020SilverMidnight]

I’ve not seen any truck in here that was lower in the back with the maxtrac progressive lowering rear springs

Sent from my iPhone using Tapatalk

This looks really sharp! Tire and wheel specs if you will please?

 

[ferraiolo1]

If you look at my topics. I have a build thread with all the info and clearance pictures.


Sent from my iPhone using Tapatalk

 

[JMIngrodi]

I appreciate you guys help so far. Im sorry I didnt know it was called a "reverse level" but this IS what I want to do to my 19 bighorn.

 

[JMIngrodi]

If you look at my topics. I have a build thread with all the info and clearance pictures.


Sent from my iPhone using Tapatalk

Is it the "what have you done to your ram today" thread ?

 

[ferraiolo1]

Ferraiolo1 Ram Sport

My First ram product, coming from Silverado’s Never had any issues with gm, but I wasn’t a fan of the new generations. Plus the Ram dealer offered me almost what I paid for my 2017 OTD four years ago for trade in, and was able to get the RAM a little below msrp, which isn’t too common in...

5thgenrams.com

Sent from my iPhone using Tapatalk

 

[Scram1500]

I had the Maxtrac springs for a while and can confirm that there is still 0.5" of rake and ride feels the same. You won't end up in Carolina squat

 

[JMIngrodi]

Finished this up today and it turned out great. Theres about a 3/8" difference gap in the rear wheel well than the front (measuring from the top of the tire to the edge if the fender.) Im happy. I read they could possibly settle some too. Thank you your help!

 

[Whoa_Ram]

Mine was a little higher in the rear as well. I'll see if I can find a picture.