5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

What did you do to your Ram today???

riveralg79

Active Member
Joined
Aug 28, 2021
Messages
116
Reaction score
17
Once you get the new switch in your hand you will see the three tabs you push from the back side. And it pops out


Sent from my iPhone using Tapatalk

What panels needed to be removed?


Sent from my iPad using Tapatalk
 

FN-2187

Active Member
Joined
May 29, 2021
Messages
49
Reaction score
51
10min $40 mod done.

c36c8d48d4020c057412be4cbcec558f.jpg

f4c7ebb5d81ae085cab633a444abedc0.jpg



Sent from my iPhone using Tapatalk
I just did this a couple weeks ago on my limited. Nice man.

Sent from my SM-N986U using Tapatalk
 

SKT Customs

5thGenRams Vendor
5thGenRams Vendor
Joined
Jun 14, 2018
Messages
1,197
Reaction score
1,572
Location
San Diego
Ordered airlift bags. For $130, I figured they'd be a good upgrade for the travel trailer and other general hauling. I'll have to do some research on which is better, but now I'm wondering if it's better to plumb them in together or on separate lines? I'm open to opinions. Guess I'll have plenty of time to research. Prime 2 day shipping will have it here late next week :LOL:

View attachment 105610
So a few of my friends have airbags on their trucks and they all say to run independent air lines. If you plumb them together, when you hit a bump it’ll transfer air back and forth and make the ride a lot worse than if they were independent. Plus if they’re independent you can adjust for if one side is heavier! That’s just my opinion based on what they’ve all told me :)
 

Moosefire66

Well-Known Member
Joined
Jun 3, 2021
Messages
230
Reaction score
100
New Flame Red bumper cover. Awaiting the matte black grille. Maybe some blackout headlights in the near future.
Have a link for the bumper cover? I only dug up one company but not for the new model trucks

Sent from my SM-G991U1 using Tapatalk
 

ferraiolo1

Spends too much time on here
Joined
Aug 18, 2021
Messages
2,300
Reaction score
3,571
Location
North Central PA
Do you have a part # for that?
Edit: nevermind, lol. It’s in the video

I got mine off eBay, but Amazon had them, and several oem Parts wholesalers, they all came out to the same price. Some with free shipping some without.


Sent from my iPhone using Tapatalk
 

dbark

Active Member
Joined
May 1, 2021
Messages
81
Reaction score
110
Location
North Carolina
Installed the VLED LPR reverse light. The open tailgate did make a little contact at first, i trimmed about 3/8" off the bottom of the license plate and lowered it down and it clears now. Wiring was simple with the Curt 56584 harness and 5 way trailer connector. Light output in reverse is much better than before.

PXL_20210920_221810677.jpg PXL_20210920_221856821.jpg
 
Last edited:

KRField

Well-Known Member
Joined
Oct 17, 2018
Messages
364
Reaction score
276
Location
Tri-Cities, TN
How much difference do the airbags make? I pulled my trailer for the first time this last weekend and it really had some bounce in the back end.

It really helps with the sag especially since I’m leveled. I added it since I run up to 7500 lbs loads. It sounds like you may have too much pressure in them. They are rated to over 2000 lbs fully inflated.


Sent from my iPhone using Tapatalk
 

Users who are viewing this thread

Top