Reverse lights - Baja Designs S2

[Ram.Rebel.19]

Anyone have an experience with Baja Design S2 reverse lights? Any reviews on these and install advice is appreciated!

RAM S2 Sport Dual Reverse Light Kit - RAM 2019-24 1500 NOTE: Rebel - Baja Designs - Off-Road LED & Laser Lights | Automotive, Jeep, Truck, UTV, ADV, Dirtbike

The 2019-On Dodge Ram Rebel Dual S2 Reverse Kit has your back! If your stock reverse lights are not cutting it in the dirt or in your daily life, Baja Designs has a solution for you. This kit comes with everything you need for a simple installation that provides a huge upgrade to your stock...

www.bajadesigns.com

The oem reverse light barely put out anything so looking for some light!

 

[banditsc]

Seems overpriced and the install cuts into your wiring harness.

 

[grimreefer]

Pricey.

The following thread has better options. From the Luyed lights to 18W pods, complete with all kinds of install tips and tricks: Luyed LED - New (Frugal) LED Reverse Lights

 

[Jako]

I have them installed prior to the kit. I am very happy.
There are many options for reverse lights in price and installation.
Recommend you review the various posts.

Bed Light Compilation

I was searching for a pdf for the bed light kit installation and came across these 3. BUT I can not find the installation instruction pdf. Anyone with more info please feel free to post. https://5thgenrams.com/community/threads/mopar-bed-light-kit-tips.2890/page-4...

5thgenrams.com

start at post #27 for my install prior to the kit

OEM LED reverse lights are absolutely terrible...what have you guys done to address this?

Finished, these are the Rigid Ignite diffused. Made a big difference! Really would like to see how you mount those on bumper in daylight. Thanks.

5thgenrams.com

No need to cut your harness as there are Curt "intermediate" harnesses. I recommend the 7 wire if you want auxiliary power option at the rear of the truck.

Lot of information in the "Compilation" post.

Purchased at CJ Pony, can also purchase for less without the harness.

https://www.cjponyparts.com/led-work-light-clear-lens-wide-cornering-pattern-pair-s2-sport-baja-designs/p/BAJ547805/

 

[Bcryan]

Why would you need to spend that kind of money and Time when you can just replace the bulbs?

i must be missing something

 

[Nickv1214]

I have this , super clean look and bright as ever . For the price you cannot beat it .


VLEDS 1800lm 5500K White LP-Reverse License Plate Backup Light System Black Satin Finish 72 LED https://www.amazon.com/dp/B0813XFLS...abc_XEG2VRFAWZPWGKN6NK4T?_encoding=UTF8&psc=1

 

[Jako]

De gustibus non est disputandum​

De gustibus non est disputandum - Wikipedia

en.wikipedia.org

Additional option on lighting if you want the reverse lights on with bed lights (Ram not running), Off or just reverse lights.
Post 363

License Plate Reverse light

New I just installed the VLED 1800 Lumin license plate reverse light bar. It’s bright!!! Well worth the price! No I didn’t install it, I took it to Cap-it and had their guys install it. $60 to install. I don’t mess with wiring on a new truck. Here’s a link...

5thgenrams.com

 

[Jako]

Why would you need to spend that kind of money and Time when you can just replace the bulbs?

i must be missing something

Can't replace the LED reverse bulbs and they are inadequate.

 

[NoCrow]

I have this , super clean look and bright as ever . For the price you cannot beat it .


VLEDS 1800lm 5500K White LP-Reverse License Plate Backup Light System Black Satin Finish 72 LED https://www.amazon.com/dp/B0813XFLS...abc_XEG2VRFAWZPWGKN6NK4T?_encoding=UTF8&psc=1

I see a review that stated it doesn't work on 5th gen ram because it hits the tailgate a d rubs the paint when open.

 

[Jako]

I see a review that stated it doesn't work on 5th gen ram because it hits the tailgate a d rubs the paint when open.

I believe some may get lucky but it appears most have to trim the bottom of the license plate and drill new holes for the plate and light. It rubbed on my tailgate and I chose to go with the Bajas.

 

[Nickv1214]

I haven’t had any issues with that at all , and I use it all the time with the tailgate down hauling the quad around . Hasn’t happened to me yet . And worst case , buy a foam strip to stick on top of the light so if it does rub , it only rubs on foam .

 

[Ram.Rebel.19]

Thanks for all the feedback everyone. There is some good info here!

 

[Ratchet]

I can confirm that the Xenon Depot license plate reverse led assy works perfect with no tailgate contact as well. A simple splice into the tow harness and you're done.

Amazon.com: XTR LP REVERSE LIGHT SYSTEM: Automotive

Buy XTR LP REVERSE LIGHT SYSTEM: Headlight & Tail Light Conversion Kits - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

www.amazon.com