3.5” Readylift kit installed

[410DelmonicoSport]

Finally had some time at work to install my lift. Went with the Readylift 3.5 with control arms, but opted to skip the 2” preload spacer and install Bilstein 6112s. Used Bilstein 5100 shocks for the rear. For wheels and tires I did the Toyo Open County AT3 35x12.50 and the Asanti Workhorse in a 20x10 -20 offset. It rubbed a little bit, but not too terrible. I am absolutely in love with this setup so far as it rides so much better than factory.

 

[Milks19Ram]

Finally had some time at work to install my lift. Went with the Readylift 3.5 with control arms, but opted to skip the 2” preload spacer and install Bilstein 6112s. Used Bilstein 5100 shocks for the rear. For wheels and tires I did the Toyo Open County AT3 35x12.50 and the Asanti Workhorse in a 20x10 -20 offset. It rubbed a little bit, but not too terrible. I am absolutely in love with this setup so far as it rides so much better than factory.

Which setting did you put the 6112s on? Looks really nice.

 

[410DelmonicoSport]

Which setting did you put the 6112s on? Looks really nice.

I put them on #6 to get the 2” of lift I would have gotten from the preloads. Although, in all my excitement, I forgot to measure after it was done.

 

[Milks19Ram]

I put them on #6 to get the 2” of lift I would have gotten from the preloads. Although, in all my excitement, I forgot to measure after it was done.

Thanks

 

[Milks19Ram]

Finally had some time at work to install my lift. Went with the Readylift 3.5 with control arms, but opted to skip the 2” preload spacer and install Bilstein 6112s. Used Bilstein 5100 shocks for the rear. For wheels and tires I did the Toyo Open County AT3 35x12.50 and the Asanti Workhorse in a 20x10 -20 offset. It rubbed a little bit, but not too terrible. I am absolutely in love with this setup so far as it rides so much better than factory.

One more question, did you use the top strut extension?

 

[410DelmonicoSport]

One more question, did you use the top strut extension?

Yes, I used the 1.5” spacer on top of the strut assembly.

 

[LoneWolf98]

Truck looks great! Thanks for the info

 

[410DelmonicoSport]

Truck looks great! Thanks for the info

Thanks for the compliment, I’m really enjoying it. It rides so smooth, and every time I go to drive it, just looking at it puts a smile on my face haha.

 

[Ccm12]

So if I am following. This kit along with bil 6112 at #6 would be what you used?

2

2019-2021 Ram 1500 (including Rebel) 2WD/4WD 2 inch Leveling Kit w/ new Tubular Upper Control ArmsFor use on New body style Ram 1500 4WD. Not for use on classic body style Ram 1500. Also fits Rebel Edition Front strut extension leveling kit Not for use on air-suspension equipped trucks CNC...

www.readylift.com

 

[410DelmonicoSport]

No, I used the full Readylift 3.5” kit, not the leveling kit. You can level it with just the Bilsteins and control arms if you’re not looking to do anything to the rear.

 

[Ccm12]

But you left out the coil spacers in front right? You just used control arms and top hats on strut?

 

[410DelmonicoSport]

Correct, I didn’t use the preload spacers.