Side steps. Question

[cruz1996]

Hey ram owners. I’m ordering some steps for my truck. I keep seeing some online that are 5” some 6” and even 4” what would you all go with on a crew cab? I don’t want something to short and nothing to long of course.

 

[hotsht333]

my 5 inch are comfortable getting in and out ,

 

[Lonestar21]

my 5 inch are comfortable getting in and out ,

Did you have any issues installing them? Due to the paint over spray

 

[Accountant]

Did you have any issues installing them? Due to the paint over spray

Need to remove all the overspray. I used wire brush wheel on my dremel. Be sure you can hand thread the nuts easily on each bolt otherwise you will likely cross thread the nut.

 

[Tat2GirlAz]

Did you have any issues installing them? Due to the paint over spray

This is why I used a die instead of a wire brush. Guaranteed not to jack up the threads on the studs.

 

[hotsht333]

Did you have any issues installing them? Due to the paint over spray

a little paint on the studs, i just used a 18 volt impact driver. no problem at all. took about an hr

 

[Accountant]

OP I would just advise caution. A few folks have broken the factory studs.

 

[craigrh13]

Is there anything out there similar to the side steps on the f150’s?? Those were perfect. Composite and sat high and tight up against the cab. The factor Mopars sit way too low.

 

[Bellpa]

my 5 inch are comfortable getting in and out ,

Do you happen to have any side view pics of these on your truck? I'm interested in replacing my OEM ones with these if they sit closer to the body...

 

[hotsht333]

Do you happen to have any side view pics of these on your truck? I'm interested in replacing my OEM ones with these if they sit closer to the body...

These sit pretty close, if you would like a closer I can take another pic

 

[Icecold77]

Is there anything out there similar to the side steps on the f150’s?? Those were perfect. Composite and sat high and tight up against the cab. The factor Mopars sit way too low.

Go Rhino makes great side steps (they used to call them Raptor style, RB something).. dont think they have much for the 19 out yet.. I'm waiting until they do to buy mine. Had issues in the last with a few brands other than them

 

[craigrh13]

These sit pretty close, if you would like a closer I can take another pic

What brand and model are those? Those look good.

 

[rdz418]

Mopar has a set of off-road running boards (82215508AB). They are similar to the Go Rhino ones and the ones on my Raptor. Sitting at the dealership, waiting for my truck to arrive. They sit pretty close.

 

[craigrh13]

Mopar has a set of off-road running boards (82215508AB). They are similar to the Go Rhino ones and the ones on my Raptor. Sitting at the dealership, waiting for my truck to arrive. They sit pretty close.

Yeah they want entirely too much for them based on what I seen. Like $800 or so for them. Screw that!

 

[Accountant]

Mopar has a set of off-road running boards (82215508AB). They are similar to the Go Rhino ones and the ones on my Raptor. Sitting at the dealership, waiting for my truck to arrive. They sit pretty close.

They are really sweet and solid as Fawk.

 

[banditsc]

Yeah they want entirely too much for them based on what I seen. Like $800 or so for them. Screw that!

I got mine from a dealer in OKC on EBay for $650 shipped.

 

[hotsht333]

What brand and model are those? Those look good.

Iron cross patriot stainless, got them a real truck.com.on sale for 435 right now

 

[Jhaney]

I got mine from a dealer in OKC on EBay for $650 shipped.

You remember the dealer in OKC?

 

[JamMastaJ]

I got these, I like Um

https://www.carid.com/2019-ram-1500...21959.html?parentsubmodel[]=SUBMODEL|Crew+Cab

 

[banditsc]

Fowler in OKC