What did you do to your Ram today???

[Thr33BlindMice]

$11 bar at harbor freight, $26 for 2 stackable husky bins at Home Depot, very budget friendly bins for grocery shopping ride home. I got another bar that will go in the back of the bed, need to find bins with covers, these will be for moving blankets, straps, bungee cords, small tool box, etc. Overall, im satisfied.

 

[Diamondback]

Removed my rear slider and added Felt to keep it from rattling ..

 

[Diamondback]

While I was in the rear of the truck, I noticed a lone connector all by itself. I knew I hadn't unplugged anything, so I took a couple photos and when I came inside, I looked up the connector to know what it was supposed to be used for.



The manual says it is the "Module - Battery Pack Control C1" for the 48V eTorque setup.
hmmm .. ok, so what wires can I tap into?

RED : Fused B+ (also running to other items (slider window motor, etc.)?
BLACK : GROUND
PINK/VIOLET LINE : Fused IG Swith Output (Run+Start) -- time to look under the hood to see if I can simply add a fuse or if there is already one in place. Don't think it is, though, as it seems the wiring ties directly into the generator (48V)

 

[Ramtrx]

While I was in the rear of the truck, I noticed a lone connector all by itself. I knew I hadn't unplugged anything, so I took a couple photos and when I came inside, I looked up the connector to know what it was supposed to be used for.

View attachment 59028

The manual says it is the "Module - Battery Pack Control C1" for the 48V eTorque setup.
hmmm .. ok, so what wires can I tap into?

RED : Fused B+ (also running to other items (slider window motor, etc.)?
BLACK : GROUND
PINK/VIOLET LINE : Fused IG Swith Output (Run+Start) -- time to look under the hood to see if I can simply add a fuse or if there is already one in place. Don't think it is, though, as it seems the wiring ties directly into the generator (48V)

It’s for the etorque. If you had it that would be used. We all have it if the same wire bundle was used. Most are same.

 

[NewTruckWhoDis]

Removed my rear slider and added Felt to keep it from rattling ..

Huh, is that where it rattles? I noticed mine would rattle when partially open and music was up. Good job on the fix. Might have to do that now.

 

[Ellisstrong]

Huh, is that where it rattles? I noticed mine would rattle when partially open and music was up. Good job on the fix. Might have to do that now.

I added felt early on without removing the slider. I didn’t know that was an option. Removing my factory sub got rid of the rattle all together of course.

 

[Zogg44]

View attachment 59023

View attachment 59024

$11 bar at harbor freight, $26 for 2 stackable husky bins at Home Depot, very budget friendly bins for grocery shopping ride home. I got another bar that will go in the back of the bed, need to find bins with covers, these will be for moving blankets, straps, bungee cords, small tool box, etc. Overall, im satisfied.

Bought that exact bar yesterday although it was $14.99 for me. Will be picking up bins next time I'm at Homer's.

 

[Thr33BlindMice]

Bought that exact bar yesterday although it was $14.99 for me. Will be picking up bins next time I'm at Homer's.

HF is literally less than 1 mile from my house... I only buy one item per visit that way I can use the 20% off 1 item...lol.

 

[Helmetface]

It was a long day...there were some casualties, but in the end, it all came together.



Motofab 2.5" leveling kit, then I strapped some 295/70/18's onto Black Rhino Duggers +0

 

[z0n3]

Replaced my cabin air filter after 1 year of ownership. That thing collects a lot of crap. Glad it does it’s job!

 

[Mustangmike66]

Installed the Mopar window air deflectors.

Sent from my iPhone using Tapatalk

 

[K_Hub]

Hunters who don't live in the city. Also live by the sand dunes. They also help with launching the boat on dirt ramp. Also they look better. How many more reasons do you need. Stock had 32" tires now they are 33".

Sent from my SM-G965U using Tapatalk

You live in Imperial County CA DJM?


Sent from my iPhone using Tapatalk

 

[805myth1]

Finally added another piece to the puzzle. Replace rear door speakers to infinity speakers.

Still have more to be installed and build a custom sub box.

 

[Thr33BlindMice]

It was a long day...there were some casualties, but in the end, it all came together.

View attachment 59037

Motofab 2.5" leveling kit, then I strapped some 295/70/18's onto Black Rhino Duggers +0

any rubbings? did you have to trim?

 

[GraniteRam]

It was a long day...there were some casualties, but in the end, it all came together.

View attachment 59037

Motofab 2.5" leveling kit, then I strapped some 295/70/18's onto Black Rhino Duggers +0

You run into any issues with the wheel weights hitting the calipers?

 

[Helmetface]

any rubbings? did you have to trim?

No rubbing or trimming.

You run into any issues with the wheel weights hitting the calipers?

Yes. The inner most row of weights were smacked off by the caliper on test drive #1.

--

I made a thread over in wheels and tires with more in and pictures.

 

[Waterfowler41]

Finally finished up my sway bar install with the new end links. Roadmaster sent smaller bushings to work with the top mount location. Sway bar was an excellent add to the truck.

 

[DangerHawk]

I installed some Mopar steps. Now my 5'1" wife can get in easier.

Dealer wanted $150 to install them! I did it myself in like a half hour. Six nuts per side and you're done.

 

[Thr33BlindMice]

$62.95 on amazon for a full front and rear set of Husky Weatherbeater, it said Used but it's not, the box was a little banged up but the mats are spotless spanking new. One day Prime delivery. They still have 5 of them listed i think. Get them if you can, save more than half priced. I love the way they fit, very clean. Once again, im very satisfied.

 

[Big Red Rebel]

2 inch level with upper control arms
So happy with the look and drives like the factory set up
Now I need to win the lottery so I can buy wheels and tires