Bed utility rail nuts

[cj7]

Anyone found a bed utility rail nut that fits?
My Frontier had Utili-Trak channel that fit standard Unistrut spring nuts.
The RAM version is smaller.

 

[Murph]

Are you talking about the bed accessory rails that slide? I am trying to get a few more too if you are

 

[RJS]

Are you talking about the bed accessory rails that slide? I am trying to get a few more too if you are

They come with the Mopar bed rails so there will be a Ram part #. I recommend using them as they are hexagonal and fit the holes in the bed sides. They won't spin when you are putting the bolts in.
Probably not cheap but one of the Mopar parts discount sites or maybe Ebay are options.

They are metric, 6mm IIRC.

 

[RebelWraith]

They come with the Mopar bed rails so there will be a Ram part #. I recommend using them as they are hexagonal and fit the holes in the bed sides. They won't spin when you are putting the bolts in.
Probably not cheap but one of the Mopar parts discount sites or maybe Ebay are options.

They are metric, 6mm IIRC.

Pretty sure he is referring to a spring nut to fit in to the channel of the utility rail. Not the crush nuts that are used for mounting the rails.

 

[Jako]

FYI hope it helps.

Utility Bed Rail - T-Slot nut size - M12 16mm slot

Summary: M12 T-Slot Nut for a 16mm slot ground down ~1-2mm in height. Only found these available at Mcmaster-Carr. 16mm length bolts are perfect. 25mm would likely be max when you add on extras to avoid bottoming the bolt out. If I were to do this again, I'd just cut metal plate into squares...

5thgenrams.com

Utility Bed Rails Install

Yes original bolts, I let them rest on the bottom of the holes. Thanks

5thgenrams.com