Windshield Brow Tint

[31RamIt]

Who's done it? What did you use? Do you have pictures?

 

[User_3336]

Are you talking about tint on the top of the windshield down to the "AS1" line?

 

[31RamIt]

Are you talking about tint on the top of the windshield down to the "AS1" line?

I'm not sure where it is on our windshields, but I figured I'd go to about the bottom of the camera housing.

 

[FJB!!19limited]

I have done a "banner" on all my trucks. 5% tint.

 

[Abesosa]

I have done a "banner" on all my trucks. 5% tint.

Did you buy precut and install yourself? Deciding how many inches down I want to go…. Also love your username #letsgobrandon


2019 Ram 1500 Limited Granite Crystal 4x4 with Off-Road Group and air ride
20% Cermanic Tint
USA Flag Decal on rear 5th Window
Xpel Door Edge and door handle Protection
Sent from my iPhone using Tapatalk

 

[Trykonkid11]

Mine is about 1” from bottom of plastic housing.
I’ll take a better picture tomorrow if you what one.

Sent from my iPhone using Tapatalk

 

[greenlawnracing]

not the best pictures, but I have done it on every car that Ive has. I just ask them to “go a little lower than the ANSI line and just their best judgment“. IIRC The placement of the toll tag and the mirror housing played a factor in where it ended up. Highbrow defines a vehicle in my opinion, really a nice accent. I do realize it is not for everyone

 

[FJB!!19limited]

Did you buy precut and install yourself? Deciding how many inches down I want to go…. Also love your username #letsgobrandon


2019 Ram 1500 Limited Granite Crystal 4x4 with Off-Road Group and air ride
20% Cermanic Tint
USA Flag Decal on rear 5th Window
Xpel Door Edge and door handle Protection
Sent from my iPhone using Tapatalk

I have a local tint guy do it for me and mine comes out to about 6 inches from top of the window to bottom. It is just before the camera. There would be more room to add if you choose however. Thanks buddy #letsgobrandon is correct!

 

[User_3336]

Its called an "AS1" line, not an "ANSI" line.

What is an AS-1 Line On Your Cars Windshield - Window Tint Laws

If you look very closely at your vehicle's windshield, you will be able to see a hash sign or other markings on the top or bottom corner of your car's

windowtintlaws.us

 

[User_3336]

I'm not sure where it is on our windshields, but I figured I'd go to about the bottom of the camera housing.

Look closer!

 

[NJC1684]

8” at center from outside top edge of windshield & 10-5/8” down from each corner. Cut it out on the outside of the windshield, cut it down the middle and put it up as two separate pieces inside.

 

[31RamIt]

8” at center from outside top edge of windshield & 10-5/8” down from each corner. Cut it out on the outside of the windshield, cut it down the middle and put it up as two separate pieces inside.

Thank you

 

[31RamIt]

8” at center from outside top edge of windshield & 10-5/8” down from each corner. Cut it out on the outside of the windshield, cut it down the middle and put it up as two separate pieces inside.

Would something like this work? Idk which style I would pick though.

 

[NJC1684]

Would something like this work? Idk which style I would pick though.

Would need to choose depending on the trim level it appears. 1-3 to ASI line and 4-6 below maybe?

 

[31RamIt]

Would need to choose depending on the trim level it appears. 1-3 to ASI line and 4-6 below maybe?

Yeah, the site isn't very specific about what goes where. I'm assuming the one with the larger radius cutout would be for around my camera housing

 

[Sal731]

Here’s mine. Make sure you go around sensors for rain sensitive wipers

 

[Sal731]

The lines aren’t actually on my windshield. That’s a reflection of power lines running above truck

 

[HSKR R/T]

Did one on my truck. Decided to go extreme and mine goes from top of windsheild all the way to bottom with 35% tint. Decided not to half *** it by only doing a part of the windshield. After riding in a friend's truck with a brow I'm glad aindid while windsheild as it annoyed the living F out of me riding in his truck. Felt the need to crouch down to see under the brow because I didn't want half my vision to be tint and half no-tunt.

 

[31RamIt]

Did one on my truck. Decided to go extreme and mine goes from top of windsheild all the way to bottom with 35% tint. Decided not to half *** it by only doing a part of the windshield. After riding in a friend's truck with a brow I'm glad aindid while windsheild as it annoyed the living F out of me riding in his truck. Felt the need to crouch down to see under the brow because I didn't want half my vision to be tint and half no-tunt.

My windshield is 55%, I just like the look of the brow.

 

[MoreOvalteenPlz]

50% on the whole windshield with a 5% strip that goes down about 1.5” below the AS1 line