5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Wind Noise from Pano Sunroof, Anyone Else having same Problem?

So, I made a post early on about wind noise coming from my Panoramic sunroof on my Ram Limited. I brought the truck to the dealer shortly after I got it and after 4 trips we got it fixed properly.

Trip 1: sunroof adjustment and reset: NO CHANGE
Trip 2: Star case found and foam tape added to wind deflector. NO CHANGE
Trip 3: New seals and sunroof glass. Fixed until I opened the runroof and the seal fell on me...
Trip 4: Discovered the seal was installed upside down and sunroof needed adjustment as it wouldn’t auto close: FIXED.

The sunroof is silent and it’s great. I just hope that there’s not another seal installed upside down.

49940dff62d70c9e8d03531e689d90db.jpg


ceb10fb21482b78eb4ae522326992adf.jpg


88e75187d0828e89421e2a8156338ce7.jpg


1845d667a5dcd01d9b4fcbc63a365412.jpg



Sent from my iPhone using Tapatalk
 
So, I made a post early on about wind noise coming from my Panoramic sunroof on my Ram Limited. I brought the truck to the dealer shortly after I got it and after 4 trips we got it fixed properly.

Trip 1: sunroof adjustment and reset: NO CHANGE
Trip 2: Star case found and foam tape added to wind deflector. NO CHANGE
Trip 3: New seals and sunroof glass. Fixed until I opened the runroof and the seal fell on me...
Trip 4: Discovered the seal was installed upside down and sunroof needed adjustment as it wouldn’t auto close: FIXED.

The sunroof is silent and it’s great. I just hope that there’s not another seal installed upside down.









Sent from my iPhone using Tapatalk
how can it be installd upside down? Is the seal have a ''slot'' or a groove? Mine need to be pushed foward by hand when close to remove the wind noise, and before playing with the 6 screw that hold the glass, I want to look at the seal but don't know how to see if its correct or up side down
 
how can it be installd upside down? Is the seal have a ''slot'' or a groove? Mine need to be pushed foward by hand when close to remove the wind noise, and before playing with the 6 screw that hold the glass, I want to look at the seal but don't know how to see if its correct or up side down

The slot is on the bottom and when installed correctly there’s no gap when the sunroof is closed.


Sent from my iPhone using Tapatalk
 

Users who are viewing this thread

Back
Top