Wheel spacers recommendations

[Perr1356]

Hi guys looking for wheel spacers that are good quality USA made and available without long wait any recommendations what are you guys running ?

 

[cskindt]

BORA

 

[Perr1356]

BORA

Thanks where did you order them and how long did it take ?

 

[jl13]

Thanks where did you order them and how long did it take ?

Not sure of the timing currently but if I recalled correctly mine took about 3 weeks a year ago

Wheel Adapters, Wheel Spacers, Hub Rings for your car! | Motorsport Tech

Motorsport Tech is your absolute number one source for wheel adapters, wheel spacers, and hub centric rings. We manufacture the finest adapters in the world, and we do wheel polishing, chroming, powder coating, and color matching, as well as sell wheels and tires at WHOLESALE PRICES.

www.motorsport-tech.com

 

[cskindt]

Thanks where did you order them and how long did it take ?

I ordered them from BORA.
It took about 10-days for a pair of 3/4" and a pair of 1" spacers to arrive.
Seemed worth the wait for me.

 

[Black19]

I’m thinking about 3/4” front and rear or possibly 1” front and rear. Do you have any pics to help me? Also did you have cut studs? I have stock 2019 Big Horn wheels.
I never ran spacer’s, any maintenance required or worries I should think about?

 

[cskindt]

I’m thinking about 3/4” front and rear or possibly 1” front and rear. Do you have any pics to help me? Also did you have cut studs? I have stock 2019 Big Horn wheels.
I never ran spacer’s, any maintenance required or worries I should think about?

I didn't have to cut the studs on my application. Others have.
I bought a set of Rebel take-offs and they have pockets that are 1" deep. No cutting necessary with almost 1/4" to spare with the 3/4" spacers.
I just measured the pocket in my OEM Bighorn NE wheels and they are also 1" deep. I could fit those with no cutting too.

There really isn't any maintenance other than checking the torque after some miles. Always use a torque wrench and never an impact gun!
The truck feels the same as it did before the spacers, real nice and smooth.

 

[Black19]

Thank you cskindt.
I heard some have to cut studs and some don’t. Hoping to not have to cut them. I’ll have to pull a wheel and measure.
Only decision is 3/4” or 1”. I don’t have factory flares so maybe 3/4” will give a good stance.

 

[Jeffjad]

Bora for the win .

 

[HSKR R/T]

Thank you cskindt.
I heard some have to cut studs and some don’t. Hoping to not have to cut them. I’ll have to pull a wheel and measure.
Only decision is 3/4” or 1”. I don’t have factory flares so maybe 3/4” will give a good stance.

Stagger the sizes. The front is 1/4 wider than the rear. So do 3/4 front and 1" rear to get them both at the same track width.

 

[cskindt]

Thank you cskindt.
I heard some have to cut studs and some don’t. Hoping to not have to cut them. I’ll have to pull a wheel and measure.
Only decision is 3/4” or 1”. I don’t have factory flares so maybe 3/4” will give a good stance.

How much poke are you looking for.
I only wanted to make the tire stand proud of the fender just a little.
I went 3/4" front and 1" rear to even the wheel track. In stock form, the front is about 0.5" wider.

Looks like @HSKR R/T beat me to it.

 

[Black19]

Definitely Bora!!
Staggered sounds like it makes sense. Don’t want a crazy poke, just enough to know it’s not stock and have a good stance.
My biggest issue holding me back is cutting the studs….really don’t want to do that.

 

[cskindt]

Thank you cskindt.
I heard some have to cut studs and some don’t. Hoping to not have to cut them. I’ll have to pull a wheel and measure.
Only decision is 3/4” or 1”. I don’t have factory flares so maybe 3/4” will give a good stance.

Pictures. @Black19 more pics
I don't have good before pics for comparison so just subtract 3/4" front and 1" rear in your mind.
295/75 R18 on stock Rebel wheels


This is the front with the 3/4" spacer.



My Rebel and BH NE wheels have the same pocket depth.

 

[Black19]

Pictures sure did help. That is exactly what I need!!

 

[HSKR R/T]

Definitely Bora!!
Staggered sounds like it makes sense. Don’t want a crazy poke, just enough to know it’s not stock and have a good stance.
My biggest issue holding me back is cutting the studs….really don’t want to do that.

It's not that big of a deal to cut the. Especially if you have power tools. A sawzall with a metal blade. And a grinder or file to smooth off the sharp edges

 

[delastatte]

anyone knows how deep the rim pockets are on the oem 20in rim ? cheers !

 

[HSKR R/T]

anyone knows how deep the rim pockets are on the oem 20in rim ? cheers !

Which 20" wheel? There are several options

 

[delastatte]

these