What is the best way to remove overspray on studs for side steps

[W13NY]

Used the 1.25mm die - worked great and fast

 

[C.E.Divine]

has anyone tried paint remover

That was my first thought. Kleen Strip premium stripper is available in a gel and is very easy to use. I use it very often at work, and there isn't much it won't take down to the substrate in 2-3 applications.

 

[Creep0321]

I saw someone somewhere mention putting some anti corrosion on the bolts after using the die. Any recommendations?

 

[Zmoney]

I used a die as well. I was able to clean the thread easily and could turn most by hand. The paint chipped right off. Took just a few minutes

 

[Jagtyson]

I am going to try to install my steps today and curious what is the best method to remove the overspray on the studs. thanks

I used a propane torch and welders wire brush. I did run the nut onto each stud to clean out the threads before mounting the boards. Worked great.

 

[JayMann]

I didn't use anything, just let it be a type of thread locker haha

 

[nvialpando]

8mx1.25 Class 8 nut and an impact drill, up and down a couple times and your golden. Easy. Just did the prep this morning myself, done in 10 min.

This worked out perfect. Thanks for the tip. The only thing different it did, was I used a 1 inch socket and ratchet.