5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

What are you towing?

For anyone feeling like they squat too much or are not happy with how their camper tows…

Cargomaxx 351-893HD rear springs. I gained 1.25” in the rear without anything in the bed, which honestly…… Isn’t noticeable at all from the outside. With my WDH adjusted properly, I sit 1 inch higher in the rear and the front end is within 1/8 inch of stock, Ride height. It rides like an absolute dream and handles my 725lbs +/- tongue weight & 30ft TT like an absolute dream loaded. Unloaded it drives like stock.

Unloaded

IMG_4540.jpeg

Loaded

IMG_4557.jpegIMG_4558.jpeg

And in case you run into what I have run into where your tailgate won’t go all the way down with your tongue jack. Give a search and you can find easy instructions to turn the head of your tongue. Jack to let your tailgate drop down.

IMG_4559.jpeg
 

Attachments

  • IMG_4560.jpeg
    IMG_4560.jpeg
    331.3 KB · Views: 8
For anyone feeling like they squat too much or are not happy with how their camper tows…

Cargomaxx 351-893HD rear springs. I gained 1.25” in the rear without anything in the bed, which honestly…… Isn’t noticeable at all from the outside. With my WDH adjusted properly, I sit 1 inch higher in the rear and the front end is within 1/8 inch of stock, Ride height. It rides like an absolute dream and handles my 725lbs +/- tongue weight & 30ft TT like an absolute dream loaded. Unloaded it drives like stock.

Unloaded

View attachment 194195

Loaded

View attachment 194193View attachment 194192

And in case you run into what I have run into where your tailgate won’t go all the way down with your tongue jack. Give a search and you can find easy instructions to turn the head of your tongue. Jack to let your tailgate drop down.

View attachment 194191
I'm thinking of turning the jack head also. Did you tap new holes or use the same ones? I would like the light to face the passenger side.
 
I'm thinking of turning the jack head also. Did you tap new holes or use the same ones? I would like the light to face the passenger side.
I tapped new holes. I actually messed up the first time and had to rotate it a little more towards the camper.


I got this tap and I set. The video I watched said the bolts were universal and sure enough this was the correct size for me. I did test it on a piece of metal first and took one of the bolts out of the tongue and ran it into the new hole in the tester metal to make sure it worked.
 

Attachments

  • IMG_4893.png
    IMG_4893.png
    137 KB · Views: 4
I tapped new holes. I actually messed up the first time and had to rotate it a little more towards the camper.


I got this tap and I set. The video I watched said the bolts were universal and sure enough this was the correct size for me. I did test it on a piece of metal first and took one of the bolts out of the tongue and ran it into the new hole in the tester metal to make sure it worked.
Thanks, buy the picture it looked a little off from what I've seen.
 

Users who are viewing this thread

Back
Top