VIOFO A329 Dashcam hardwire for parking

[Rocket3GT]

I have a Viofo A329 dashcam and wish to tap into my 2024 Ram 1500 Laramie fusebox so can use the parking feature. I will need a constant power fuse and a auxillary powered fuse. Which specific fuse numbers should I tap into. There is a wire from the dashcam for constant power, a wire for auxillary power and of course a ground that will be connected to a bolt. Has anyone done this? If so, what fuse numbers did you tap into. Thx in advance. Tom

 

[firecadet613]

Pics are gone but the info is here.

Thread 'Hard-wire Dash Cam Install'

Jun 9, 2018

I had this setup on my F150 and just finished the install on my RAM. I run a Viofo A129 dual dash cam, with the rear cam mounted on the passenger side of the sliding rear window (cable tucked up inside the headliner on the passenger side.

Dash cam - https://www.amazon.com/gp/product/B07CTBB4R5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Hard wire kit - https://www.amazon.com/gp/product/B07JQ1JYPJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Fuse Tap (not shown in below pics) - https://www.amazon.com/gp/aw/d/B077PBXGKQ/ref=ya_aw_oh_bia_dp?ie=UTF8&psc=1

Looking at...

• firecadet613
• Replies: 710
• Forum: 5th Gen Modifications/Accessories

• 
•