5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Ventvisors--In channel

Sooliman

Active Member
Joined
Oct 30, 2018
Messages
56
Reaction score
24
Just ordered them off eBay.....hope they’re awesome, lol.
Now I need to get my other ones returned and issued a refund.
 

Gondul

Ram Guru
Joined
Oct 9, 2018
Messages
835
Reaction score
645
Location
Florida
EDIT

Mine will be in *tomorrow* ...
@Rayzram, do you have a closer pic of your vent visors?
 
Last edited:

chino

Member
Joined
Oct 21, 2018
Messages
16
Reaction score
26
I bought the us visor ones and wa skeptical at first since the fronts didn’t have any double sided tape but they work great, no complaints
 

Gondul

Ram Guru
Joined
Oct 9, 2018
Messages
835
Reaction score
645
Location
Florida
@Goatmann, here are a couple of pics. As @chino mentioned, the front ones have no tape, but the flange that slides in the channel is pretty wide... the rear ones have tape.

side.png

side 1.png
 

Goatmann

Ram Guru
Joined
Oct 2, 2018
Messages
1,103
Reaction score
584
Location
Florida
@Goatmann, here are a couple of pics. As @chino mentioned, the front ones have no tape, but the flange that slides in the channel is pretty wide... the rear ones have tape.

Gondul, thanks for the pics. Did you have to loosen the side mirrors to slide the deflector tab behind it? What do you think of the quality of the product?
 

Gondul

Ram Guru
Joined
Oct 9, 2018
Messages
835
Reaction score
645
Location
Florida
All I had to do was roll down and clean area before I started.

The material that can be seen in the pic is about 2.5mm thick acrylic.
No visible distortions and a nice even dark smoke throughout.

Seems pretty good to me... I'd buy them again.
 

Sooliman

Active Member
Joined
Oct 30, 2018
Messages
56
Reaction score
24
All I had to do was roll down and clean area before I started.

The material that can be seen in the pic is about 2.5mm thick acrylic.
No visible distortions and a nice even dark smoke throughout.

Seems pretty good to me... I'd buy them again.
I’m having trouble installing them. I know that sounds crazy....maybe I’m not seating them right behind the mirror.
 

Gondul

Ram Guru
Joined
Oct 9, 2018
Messages
835
Reaction score
645
Location
Florida
does the mirror hit the deflector when folded?

The bottom inside corner of the tow mirror pushes up against the visor and deflects it about 1/8-1/4"... IMO it does not significantly impeded folding the mirror.

Before
before.png

After
after.png
 

Sooliman

Active Member
Joined
Oct 30, 2018
Messages
56
Reaction score
24
Tremendously helpful....Can you share one more shot of the other end up by the B-pillar? Are you under the window gasket rubber?
 

John

Active Member
Joined
Aug 12, 2018
Messages
189
Reaction score
102
Anyone gone thru the carwash with them yet? Any issues?

John
 

Gondul

Ram Guru
Joined
Oct 9, 2018
Messages
835
Reaction score
645
Location
Florida
Went through a 'soft touch' when I was up in WI to get the road salt off... no issues.
 

Users who are viewing this thread

Top