brental1
Active Member
I just added the USB/`12V panel to the rear of the console in my 2022 BH with Level 1 Equipment Group.
1. Although the OR/GY-PANEL LAMPS DRIVER and YE/BU-READING LAMPS DRIVER wires were both present in Pins 6 and 7 of XY360A the USB panel does not light up. What am I missing? Is a USB cable (2, below) required for the light function?
2. What cable OE or other, do I need to activate the USB ports? I spliced a cable (in pictures) that I removed from a donor IP harness; but the terminals on it are not keyed correctly for the USB jack.
1. Although the OR/GY-PANEL LAMPS DRIVER and YE/BU-READING LAMPS DRIVER wires were both present in Pins 6 and 7 of XY360A the USB panel does not light up. What am I missing? Is a USB cable (2, below) required for the light function?
2. What cable OE or other, do I need to activate the USB ports? I spliced a cable (in pictures) that I removed from a donor IP harness; but the terminals on it are not keyed correctly for the USB jack.
