UE119 code

[Ricardo.salas64]

I have Been having some issues on my ram and its marking my U11E9 (Lost communication with AGS) code on and they recently fixed my truck from a car crash 2021 Ram Laramie classic crew cab / 5.7 V8 Hemi ? any help please

 

[CatDaddy66]

Not to be rude or obvious, but as the thread title reads, this thread is for website and forum related updates. You may have better luck posting in a thread related to your issue.

 

[Gaudetm27]

CEL: local parts store pulled code U11E9 “Lost Communication with AGS”
This site was very helpful to point out the following:

Most likely the AGS, active grille shutter, is fine and the real problem is the AAD, active air dam. So to verify the AGS works just start the vehicle and look through the grille. If the grille shutters cycle through their full range of motion you know you have power, ground and nothing stuck in the shutters. Then just unplug the AAD and to reset the code and clear the CEL unplug the negative terminal on the battery for 20 minutes. Now CEL gone and remote start works on these 15 degree mornings.

 

[Ricardo.salas64]

CEL: local parts store pulled code U11E9 “Lost Communication with AGS”
This site was very helpful to point out the following:

Most likely the AGS, active grille shutter, is fine and the real problem is the AAD, active air dam. So to verify the AGS works just start the vehicle and look through the grille. If the grille shutters cycle through their full range of motion you know you have power, ground and nothing stuck in the shutters. Then just unplug the AAD and to reset the code and clear the CEL unplug the negative terminal on the battery for 20 minutes. Now CEL gone and remote start works on these 15 degree mornings.

Thank you man I will give it a try

 

[jamiehughes]

CEL: local parts store pulled code U11E9 “Lost Communication with AGS”
This site was very helpful to point out the following:

Most likely the AGS, active grille shutter, is fine and the real problem is the AAD, active air dam. So to verify the AGS works just start the vehicle and look through the grille. If the grille shutters cycle through their full range of motion you know you have power, ground and nothing stuck in the shutters. Then just unplug the AAD and to reset the code and clear the CEL unplug the negative terminal on the battery for 20 minutes. Now CEL gone and remote start works on these 15 degree mornings.

great information..thank you.