Tried Installing a Diablosport tuner and unlocked ECU...Everything is wrong now lol

[smoedog]

Got a diablosport trinity tuner and unlocked ecu off facebook (i know). When I installed it and tried to start the truck it cranked and started and shut off after about 5 seconds. All kinds of warnings, radio asking for unlock code, ect ect. Tried to write a canned tune to it, but it kept failing. So I threw the stock ECU back in, and it runs but now I have these errors:

Radio still asking for unlock code
ABS Error
Airbag Error
Traction Control
Collision warning
Used Jscan and got these codes:
Body Controller
B2206-00 Current Vin Mismatch
B222C-00 Vehicle Configuration not programmed

Park Assist
B222A-00 Vehicle Line Mismatch

RF Hub
B222C-00 Vehicle Configuration not programmed
B2205-00 Original Vin Mismatch

Any Ideas other than taking it to the deal and getting bent over?

 

[vincentw56]

RF Hub
B222C-00 Vehicle Configuration not programmed
B2205-00 Original Vin Mismatch

Seems like it wasn't programmed to your VIN. You will need to find someone who can do that. You can't do it yourself I'm pretty sure. @Jimmy07 thoughts?

 

[smoedog]

Seems like it wasn't programmed to your VIN. You will need to find someone who can do that. You can't do it yourself I'm pretty sure. @Jimmy07 thoughts?

You mean the used unlocked ECU?

 

[vincentw56]

You mean the used unlocked ECU?

Yes, the PCM needs your VIN I'm sure. It needs to match all the other systems using your VIN.

 

[smoedog]

Yes, the PCM needs your VIN I'm sure. It needs to match all the other systems using your VIN.

Ok, so now that I have installed old PCM, shouldn't it all return to normal

 

[CHeYeNNe71]

Ok, so now that I have installed old PCM, shouldn't it all return to normal

You might need to disconnect battery to reset all systems and give it a good day....possibly.

As mentioned, you can't use just any ECM without having it programmed to your VIN.