Tradesman Lower dash removal.

[Chippewa]

2019 Tradesman. Adding cig lighter an passenger usb ports. Pop lowest skinny bezel real carefull. Then open glovbox an start at base off lower tray trim bezel being even more carefull. Watching the push button area pinching. Just pull straight out an off. Next grab a long P2 screwdriver carefull to remove an not drop down into dash junk. Then pop straight out pulling on main structure not glued on fascias.
My plan is unibit two holes thru passenger side blank area. Adding two sockets an power off an aux power wire I ran thru firewall to a switch panel I made underdriver side dash area.

Maybe these pics help somebody. Always eire to yank dash parts apart.

 

[Chippewa]

Finished look.

 

[Dr. Jim]

That is really nice! Looks like it came from the factory. Great job!

 

[BjBnet]

Exactly what I was looking for. Thanks

 

[Baseball310]

2019 Tradesman. Adding cig lighter an passenger usb ports. Pop lowest skinny bezel real carefull. Then open glovbox an start at base off lower tray trim bezel being even more carefull. Watching the push button area pinching. Just pull straight out an off. Next grab a long P2 screwdriver carefull to remove an not drop down into dash junk. Then pop straight out pulling on main structure not glued on fascias. View attachment 44975 View attachment 44976
My plan is unibit two holes thru passenger side blank area. Adding two sockets an power off an aux power wire I ran thru firewall to a switch panel I made underdriver side dash area. View attachment 44977

Maybe these pics help somebody. Always eire to yank dash parts apart.

What brand are the USB? I did the same paid a shop and mine stick out a quarter inch and not happy with the work. So hoping to find some stubby type that fit like yours