Total height of Ram 1500 with 3.5” suspension lift and 35s

[tdmaiman]

Hey guys,

Getting a Readylift 3.5” STT lift installed next week on my 2020 Ram 1500. I am debating between 33” or 35” tires. The truck cannot be higher than 7’ total to fit in my garage.

Can someone that has this setup provide info what total truck height (to top of fin) is with 35” tires?

I also wouldn’t mind seeing some pics of y’all’s setups. I am also debating on 20x10 0 offset vs -18 offet. Going to run Ridge Grapplers 12.5 wide.

Thanks for your help!

 

[sep1006]

Well I don't have the 33" or 35" tires but maybe this will help. I have a 2021 Rebel still with the stock 18" tires. Supposedly the Rebel comes with a 1" lift from the factory. I added the Bilsteins in the front set at 2" of lift and the Motofab 1.5" spacers in the back. My garage is also 7' and I only have 1" clearance to the top of the shark fin.

 

[Eighty]

I’ve got a Rebel on order, and I’ve been curious about the stock height for fitting in a garage. What setting are you in when you’re at 6’-11”?

 

[Mountain Whiskey]

I have a BDS 4 inch lift and 35x12.5x18 Tires that are really 34.5inch. I fit in parking garages marked 7 feet. I need to put a level on it and measure it though.

 

[sep1006]

I’ve got a Rebel on order, and I’ve been curious about the stock height for fitting in a garage. What setting are you in when you’re at 6’-11”?

Well that I couldn't tell you because I had it done at my friends custom off road shop. I'm sure those in the know may chime in eventually.

 

[Dragonmaster13]

My stock height 2021 was 79.5” to the fin. With 300lbs spread in the bed with tools and consumables it’s at 78-79” depending on the day.

 

[Eighty]

My stock height 2021 was 79.5” to the fin. With 300lbs spread in the bed with tools and consumables it’s at 78-79” depending on the day.

You must be in construction. We are the only people who use the word consumables.

 

[Dragonmaster13]

You must be in construction. We are the only people who use the word consumables.

Yep!