Suggestions for bed dividers?

[PM-Performance]

The MOPAR one? It was part of the Utility package and I love it. It is easy to move around and I got the aftermarket twisty bolts that allow me to make it a bed extender (It was designed originally for this purpose but apparently after 2019, it was removed because of some government regulation thingy.) And I use it for the same purpose you do... That aftermarket piece of wood thing sure sounds tempting though. I could use that as an excuse to buy a saw or something... Shhh, don't tell the wife.

Thanks guys.
I swore I read something on the reviews about them not adjusting easily and making the cleats useless and something about issues with the oem rails .
Maybe I will check these out in more detail.
I don’t use my bed for misc stuff much, but I want to start utilizing it more for smaller items and not my cab and want to avoid things rolling around.

 

[Mountain Whiskey]

Man, we could amp it up to a 2x10. We could paint it white so it is clean looking and then glue on some rainbow patterns in glitter. Top it with a My Little Pony unicorn or something. It would be perfect!

Hey, use the thick glitter. My old lady figured out the fine glitter is stripper glitter. Hard to get that crap off before getting home.

 

[mikeru82]

The MOPAR one? It was part of the Utility package and I love it. It is easy to move around and I got the aftermarket twisty bolts that allow me to make it a bed extender (It was designed originally for this purpose but apparently after 2019, it was removed because of some government regulation thingy.) And I use it for the same purpose you do... That aftermarket piece of wood thing sure sounds tempting though. I could use that as an excuse to buy a saw or something... Shhh, don't tell the wife.

Correct me if I'm wrong, but aren't you talking about the rambox bed divider? As far as I know, the non-rambox divider can't be used as a bed extender like the rambox version can.

 

[MikeyHo808]

The Mopar bed divider will accommodate MOST covers.

My tonneau has in-bed clamps with long threaded adjusting rods that stick out the bottom of the clamp. I needed to position the bed divider mounts in a certain spot on the rails so it wouldn’t intrude with those rods. The bed divider rails mount onto the cargo rails, placing it higher and closer to the bed rails. If your in-bed mounting system for your tonneau sticks out anywhere below the bed rail, you may/will experience the same problem.
I like it, just took some time trying to position it right on the rails to clear everything.
Good luck!

 

[scottmoyer]

I have the AMP bed extender. Two mount brackets attach to the rear stake pockets allowing the bed extender to be used as a bed divider when flipped in and a bed extender when flipped over

 

[PM-Performance]

I have the AMP bed extender. Two mount brackets attach to the rear stake pockets allowing the bed extender to be used as a bed divider when flipped in and a bed extender when flipped over

Thanks for the suggestion. Is it pretty easy to remove when not needed?

 

[scottmoyer]

Takes less than 10 seconds. Where are you located. I'm thinking about selling it and if you're in Florida, it might be an easy transaction.

 

[PM-Performance]

Takes less than 10 seconds. Where are you located. I'm thinking about selling it and if you're in Florida, it might be an easy transaction.

PA unfortunately

 

[Nsleone]

Thanks for the suggestion. Is it pretty easy to remove when not needed?

I’ve got that one too, it actually serves as a bed divider for me but not one you can adjust lol
With the quick latches it comes out really quick like Scottmoyer said.

 

[greenlawnracing]

I got this with the accessory that lets you make a “t”. Not quite as easy to lock in as I’d hoped, but I don’t have the factory rails. Wish I did!

Cargo Stablizer Bar | Hitchmate

Cargo Stablizer Bar | Hitchmate

www.hitchmate.com

 

[asgadf/lkjnadsfg]

Milk crate and a bungee cord, not sure where you Duponts and Rockefellers are getting all this money for a 2x8

It was rude of my to flaunt my privelege. You sir, have my apologies.

I even threw away the extra 2.5 feet I cut off, now I feel like a monster.

 

[Redfour5]

Correct me if I'm wrong, but aren't you talking about the rambox bed divider? As far as I know, the non-rambox divider can't be used as a bed extender like the rambox version can.

View attachment 116650

Yep I have the Rambox Divider like your picture. I loved it. So, the regular box isn't as nice?