I have a 2023 Ram 1500 Bighorn Etorque Crew Cab. I have the 12" Screen with the factory Alpine system.
I just did an upgrade to the system using the PAC Amppro AP4-CH41 (R.2), Additional Harness needed for the new Ram's, CH-03 ANC Harness, Kicker KS Series 3 1/2 inch speakers in the dash corners, Kicker KS Series 6x9's in the front and rear doors, Kenwood Excelon KFC-X3C 3 1/2 inch in the rear headliner, Kicker Comp R 10 inch sub and Kicker amps for the sub and other 8 speakers.
Install was pretty easy. However, after giving all the information above my rear chime for my backup sensors aren't working. The sensors themselves are working but not chiming. The front sensors are working and chime.
I downloaded the PAC PC app thinking I may need to turn on the rear sensor chime or turn up the chime. Both the rear and front sensor chimes were on and I did turn the chime up. I even turned it all the way up and the rear still didn't chime. I also checked for any firmware updates and the firmware is up to date.
I called PAC but I was at work when I was talking to them and they aren't open on the weekends. I also tried calling Crutchfield where I got all the stuff and they also referred me to call PAC directly. I'm wondering if anyone on here ran into this problem and can possibly give me some direction. Any help would be greatly appreciated.
By the way the stereo sounds FANTASTIC! Just trying to workout this chime issue.
I just did an upgrade to the system using the PAC Amppro AP4-CH41 (R.2), Additional Harness needed for the new Ram's, CH-03 ANC Harness, Kicker KS Series 3 1/2 inch speakers in the dash corners, Kicker KS Series 6x9's in the front and rear doors, Kenwood Excelon KFC-X3C 3 1/2 inch in the rear headliner, Kicker Comp R 10 inch sub and Kicker amps for the sub and other 8 speakers.
Install was pretty easy. However, after giving all the information above my rear chime for my backup sensors aren't working. The sensors themselves are working but not chiming. The front sensors are working and chime.
I downloaded the PAC PC app thinking I may need to turn on the rear sensor chime or turn up the chime. Both the rear and front sensor chimes were on and I did turn the chime up. I even turned it all the way up and the rear still didn't chime. I also checked for any firmware updates and the firmware is up to date.
I called PAC but I was at work when I was talking to them and they aren't open on the weekends. I also tried calling Crutchfield where I got all the stuff and they also referred me to call PAC directly. I'm wondering if anyone on here ran into this problem and can possibly give me some direction. Any help would be greatly appreciated.
By the way the stereo sounds FANTASTIC! Just trying to workout this chime issue.