Steering Wheel Trim Swap

[iLLeStEyECoN]

Hi all, I have a 2022 Laramie Night Edition and would like to swap both the center (what I assume is a full airbag module) and surrounding trim (I assume this is separate) for the “black” trim found in the Limited Night and, I believe, TRX.

Has anyone done this? And, if yes, can you provide me with the part numbers?

Thank you!


Sent from my iPhone using Tapatalk

 

[mikeru82]

I've swapped the surrounding trim, but not the airbag. But I used parts from a donor steering wheel I bought from ebay. It was cheaper for the complete steering wheel (minus airbag) than buying new plastic pieces from Mopar. You might have success going that route if you can't find the part numbers you need. I went in to my local dealership and worked with the parts guy to find the parts I was looking for. Sorry, I don't have those part numbers anymore.

 

[djevox]

I agree that it’s easiest to call the dealer or contact BAM (vendor here) if no one provides the part numbers in this thread.

 

[iLLeStEyECoN]

Thank you both.


Sent from my iPhone using Tapatalk

 

[THFD334]

I bought the “cover” piece that sticks to the oem trim, not impressed. I’d rather just replace the whole trim piece with the red from a rebel or trx. I’ll be following to see if anyone posts the steps to remove and replace that surround trim piece.