Stability light and engine light on, No traction control

[OnlyRams93]

Recently gave my mother’s car a jump and about a day later my service 4wd light came on and now service stability control message is on. The service 4wd light is gone just stability control message is on my dash, charged my battery all night, and I still have the stability control message on my dash. Dealership says it’s code CF147B – 92 but my 4wd still switches over I can hear it, any ideas

 

[kapinallinen2]

Recently gave my mother’s car a jump and about a day later my service 4wd light came on and now service stability control message is on. The service 4wd light is gone just stability control message is on my dash, charged my battery all night, and I still have the stability control message on my dash. Dealership says it’s code CF147B – 92 but my 4wd still switches over I can hear it, any ideas

Can not find info on "CF" A C147B-92 is "front axle disconnect sensor-performance or incorrect operation"
I would disconnect the battery for 20 minutes or so, re-connect, wait for the systems to come back on line (back-up camera, climate control, radio presets etc.) See what happens.
Code comes back, could have a real issue with the axle disconnect and not just some glitch caused by the jump-starting.

Stability control is something else, should throw a separate code.

 

[OnlyRams93]

Thanks I’ll try that