Rough country 3.5 lift!!!!Help!

[Faunce76]

I have the RC 3.5” lift on my ‘21. 3500 miles so far. Zero issues. I used their lifted struts instead of the spacers. I’m also a RC dealer and installer and we’ve never had any issues with any of their products that we’ve installed. I find them the easiest to deal with and they’re priced very fair.


Sent from my iPhone using Tapatalk

 

[BiGJZ74]

Have a 3.5 ready lift on a 2019 ram tradesman can I add billstien 5100 to that

yes. I have the readylift 3.5 without the preload spacer installed and 5100's up front on setting #4 on a bighorn.

 

[Souths1der]

I have the RC 3.5” lift on my ‘21. 3500 miles so far. Zero issues. I used their lifted struts instead of the spacers. I’m also a RC dealer and installer and we’ve never had any issues with any of their products that we’ve installed. I find them the easiest to deal with and they’re priced very fair.


Sent from my iPhone using Tapatalk

What wheel and tire setup do you have here? Also, how far outside the wheel well are they with the flares you have?

 

[Faunce76]

These are the factory flares like what would be on the Laramie. Wheels are Vision 20x9 with a 0 offset. Mickey Thompson Baja Boss at 35x1250x20.


Sent from my iPhone using Tapatalk

 

[Souths1der]

These are the factory flares like what would be on the Laramie. Wheels are Vision 20x9 with a 0 offset. Mickey Thompson Baja Boss at 35x1250x20.


Sent from my iPhone using Tapatalk

Looks great. Do the tires stick outside the fenders much?

 

[Faunce76]

Not really. 1/2 inch maybe at the most. Thanks!!


Sent from my iPhone using Tapatalk

 

[User_63152]

Thinking of this RC 3.5'' setup. But, I want actual lift springs for the rear. Probably the Bilstein 1.5'' springs. Kind of silly, some sites say they lift 1'', others say 1.5''. Which one is it?

 

[User_63152]

I have the RC 3.5” lift on my ‘21. 3500 miles so far. Zero issues. I used their lifted struts instead of the spacers. I’m also a RC dealer and installer and we’ve never had any issues with any of their products that we’ve installed. I find them the easiest to deal with and they’re priced very fair.


Sent from my iPhone using Tapatalk

This is with the 1'' spacers on the rear springs? Man, I want 35's now. LOL

 

[Faunce76]

This is with the 1'' spacers on the rear springs? Man, I want 35's now. LOL

Yes. What comes in the kit.


Sent from my iPhone using Tapatalk

 

[Ramkofsky]

the kit with lifted struts means you don't have to mess with pre-load spacers. I'd do that over a spacer or the bilsteins where you are just cranking the pre-load (same effect as a spacer)

Also to answer my own comment above, UCA angles are normal once it's on the ground. Just installed the 3.5 struts, UCAs, V2 shocks, and clayton 3.5" rear coils. Haven't swapped tires yet, so I can confirm that the lift rides as good as stock, and handling is better since it's not so soft.

Boss of a set up! I am piecing mine together to do the same. Any idea what the part # is for those springs?

 

[Talon4U2NV]

1.5" wheel spacers on the stock 20's. Also added the hellwig rear sway.


View attachment 108160 View attachment 108161

Same wheels as mine.. and not really wanting to do AM wheels.. Did you have to do the spacers?
And this is with the RC 3.5" kit and the Hellwing rear sway? (so RC rear spring spacer)

 

[Tussin]

1.5" wheel spacers on the stock 20's. Also added the hellwig rear sway.


View attachment 108160 View attachment 108161

I know this post is super old but I was wondering if you had to add a different spacer in the rear to actually make it level. I was also wondering what tire size you have on in the pic? 275/55 R20?