Reverse Lights POSTS COMPILATION

[Jako]

License Plate Reverse light

I did LED bolt lights. Definitely brightened it up, clean look, and doesn't interfere with the tailgate.

5thgenrams.com

Reverse light mod

Due to the poor lighting with the LED reverse light, I tried this today and pretty happy with the results. Let me know your thoughts... thanks! I don't plan on towing and if I have to, then it can be easily removed as I have installed quick disconnect connectors on the wires. The hardest part...

5thgenrams.com

Another reverse LED idea

I just fixed the one area of this truck that bugged me. The reverse lights are too dim and I could barely see the curb when backing up. I bought these Soundoff Signal 4" LED pods. These are white only but they have 2 and 3 color models since they're designed for police cars. I didn't want to...

5thgenrams.com

OEM LED reverse lights are absolutely terrible...what have you guys done to address this?

Finished, these are the Rigid Ignite diffused. Made a big difference! Really would like to see how you mount those on bumper in daylight. Thanks.

5thgenrams.com

LUYED LED- New (Frugal) LED Reverse Light.

LUYED Reverse Light EDIT: Install instructions provided by the manufacture LUYED. Please install however you see fit. Tapped into the 7 pin with supplied T connectors. 3M taped (supplied) to the bottom of the receiver. Install: -Look at your 7pin and look in behind your...

5thgenrams.com

Adding low profile reverse lights! (Write up)

my luck, Amazon is showing it as "Currently unavailable". :-(

5thgenrams.com

Can I add Auxiliary Lights to the Reverse Lights?

Well, since I have 8 weeks before it comes in, I have lots of time to learn and wonder about stuff. My last Ram was a 2000 extended cab 4x4 2500 sport w/ Cummins and that was back in 2000. I had a hard time backing up with tinted windows so I added auxiliary lights on either side of the back...

5thgenrams.com

Bed Lighting Kit

Would these accesss be able to fit a CB antenna fitting through? Oh yeah look underneath plenty of spots

5thgenrams.com

Which trailer plug wires to splice for LED reverse lights?

Have been trying to find the answer but not having any luck. Do not want to use a plug. Installing Rigid Ignite, that only have a red and black cable, no harness. Want a permanent install.

5thgenrams.com

Reverse Off Road LED Lights

Just my own spin on adding some back up lights. Most people that I've seen do this have them hanging lower than what I would prefer, or seem to be flimsy. Parts List: LED's: https://www.amazon.com/dp/B00G620ZVU/ref=cm_sw_r_cp_apa_i_4Dy7DbE582VHH U-Bolt...

5thgenrams.com

Reverse lighting upgrade

Love the Rebel EcoD and it's 25mpg around town, but one glaring (pardon the pun) inadequacy is the reverse lighting. Looked at the cube addons that some have used and the hitch receiver frame mounted lights, but wanted something less conspicuous. Settled on these and decided to mount them on...

5thgenrams.com

Auxiliary brake light

Hey guys, I'm looking at installing 2 aux reverse lights...I bought the curt 56584 harness and I need some direction on what to wire where! Each light has a black and red wire...I attached a pic! Any help is appreciated!!!! Thx

5thgenrams.com

Reverse Lights For 4th and 5th Gen Ram 1500 as well as TRX with Rear TRX Tow Hook Brackets

Our reverse light brackets are up for preorder at a discount. These work with any truck that has a rear TRX Tow Hook. The brackets mount to the rear two bolts of the TRX Tow Hook. The light is a Diode Dynamics SSC1 pod light with a red back light and white main light. for best results wire the...

5thgenrams.com

Multi function rear auxiliary lights.

Hello all, I have a 21 ram. The aftermarket rear bumper has auxiliary leds, they are currently controlled with a switch in the cab. I would also like them controlled with the factory reverse lights. I was going to pick up the signal from the reverse lights and add it to pin 85 on the auxiliary...

5thgenrams.com

💡 Upgraded LED Reverse Lights. Easy installation

The reverse lights on these newer trucks seem to be just for looks, they don't output any light. I was driving a customers truck in our parking lot and I simply couldn't see behind me. Its dark before and after work right now, and we've had a ton of success with these 8" lightbars, so we came up...

5thgenrams.com

 

[Atlantic Blue]

Well I tried the Luyed leds but something is wrong with wiring. BUT I like the look and size. I will have to figure out what I did wrong with the wiring this weekend.

 

[zlman]

Somewhere in the linked threads above, someone also installed these. Very low profile and I figured I'd give them a try. Ordered through aliebaba or some such, took 6 weeks but things are a mess in China right now. They come with double sided tape, and I drilled 2 small holes each side to zip tie for a little extra security.

 

[1FastHemi]

I would like to say Thanks for all the good ideas and suggestions here on this post. I borrowed some of these ideas on put them to use on my 2020 3500. Here is a link with pictures to what I posted over on HDRams. Thanks Again and keep up all the good posts ! https://hdrams.com/forum/index.php?threads/what-happened-to-rich.1812/page-15#post-25124

 

[AartWessels]

Somewhere in the linked threads above, someone also installed these. Very low profile and I figured I'd give them a try. Ordered through aliebaba or some such, took 6 weeks but things are a mess in China right now. They come with double sided tape, and I drilled 2 small holes each side to zip tie for a little extra security.
View attachment 48954View attachment 48955View attachment 48956View attachment 49095

I only have them taped, for 9 months now, still no movement, so good tape apparently. I did stick them almost immediately when the truck was brand new and clean.

 

[19TXLimited]

Somewhere in the linked threads above, someone also installed these. Very low profile and I figured I'd give them a try. Ordered through aliebaba or some such, took 6 weeks but things are a mess in China right now. They come with double sided tape, and I drilled 2 small holes each side to zip tie for a little extra security.
View attachment 48954View attachment 48955View attachment 48956View attachment 49095

Do you happen to have a link to these?

 

[zlman]

Do you happen to have a link to these?

I actually found some at Walmart in the automotive section recently.
Grabbed a set for spares, $12 I think.

 

[19TXLimited]

I actually found some at Walmart in the automotive section recently.
Grabbed a set for spares, $12 I think.

Thanks, I'll check next time I'm there. The tailgate light bar provides plenty behind the truck, but might be nice to add for lighting on the sides of the rear bumper.

 

[redevil]

Wonder why Ram hasn't fixed the horrible backup lights or have issued a safety recall on the poor lighting. Still haven't decided what route I will go with for additional back-up lights. Leaning towards the LED light strips that are also used for brake and signal lights under the tailgate.

 

[19TXLimited]

Wonder why Ram hasn't fixed the horrible backup lights or have issued a safety recall on the poor lighting. Still haven't decided what route I will go with for additional back-up lights. Leaning towards the LED light strips that are also used for brake and signal lights under the tailgate.

The LED under the tailgate is a great option. I opted for the OPT7 tailgate lightbar with sequential, but at the same time I am one who can't stop modifying a vehicle till its traded or sold, so I am looking to add additional lighting. Probably try to wire for a switch as I won't need the additional light all the time.

The strips shown above look great, although I wish there was a way to itegrate the lights above better...i.e. to have them mounted behind the plastic with an oval cutout for the light itself. It seems easy enough, so I may attempt and post my results.

 

[gHiDoRa]

Wonder why Ram hasn't fixed the horrible backup lights or have issued a safety recall on the poor lighting. Still haven't decided what route I will go with for additional back-up lights. Leaning towards the LED light strips that are also used for brake and signal lights under the tailgate.

The reserve light is just to let surround peoples that you are back out not mean to provide lighting.

 

[Jako]

How i added rear lights

So I ordered these lights and mounts from amazon. Install wasn't too bad. I ran power from a switch box I had previously installed. You could also wire them as reverse lights. I should've included a pic of them on at night. They're pretty bright for the cost, but obviously not high end...

5thgenrams.com

 

[Jako]

Aftermarket Upgraded Reverse Lights

Anyone have a reverse light solution? Seems like the reverse lights are pretty meh on my pickup. Looking for some more brightness. Looked at the under tailgate lights, but I don't want the brake and turn signals. Just bright reverse lights.

5thgenrams.com

 

[Jako]

License Plate Reverse light

I did LED bolt lights. Definitely brightened it up, clean look, and doesn't interfere with the tailgate.

5thgenrams.com

Reverse light mod

Due to the poor lighting with the LED reverse light, I tried this today and pretty happy with the results. Let me know your thoughts... thanks! I don't plan on towing and if I have to, then it can be easily removed as I have installed quick disconnect connectors on the wires. The hardest part...

5thgenrams.com

Another reverse LED idea

I just fixed the one area of this truck that bugged me. The reverse lights are too dim and I could barely see the curb when backing up. I bought these Soundoff Signal 4" LED pods. These are white only but they have 2 and 3 color models since they're designed for police cars. I didn't want to...

5thgenrams.com

OEM LED reverse lights are absolutely terrible...what have you guys done to address this?

Finished, these are the Rigid Ignite diffused. Made a big difference! Really would like to see how you mount those on bumper in daylight. Thanks.

5thgenrams.com

LUYED LED- New (Frugal) LED Reverse Light.

LUYED Reverse Light EDIT: Install instructions provided by the manufacture LUYED. Please install however you see fit. Tapped into the 7 pin with supplied T connectors. 3M taped (supplied) to the bottom of the receiver. Install: -Look at your 7pin and look in behind your...

5thgenrams.com

Adding low profile reverse lights! (Write up)

my luck, Amazon is showing it as "Currently unavailable". :-(

5thgenrams.com

Can I add Auxiliary Lights to the Reverse Lights?

Well, since I have 8 weeks before it comes in, I have lots of time to learn and wonder about stuff. My last Ram was a 2000 extended cab 4x4 2500 sport w/ Cummins and that was back in 2000. I had a hard time backing up with tinted windows so I added auxiliary lights on either side of the back...

5thgenrams.com

Bed Lighting Kit

Would these accesss be able to fit a CB antenna fitting through? Oh yeah look underneath plenty of spots

5thgenrams.com

Which trailer plug wires to splice for LED reverse lights?

Have been trying to find the answer but not having any luck. Do not want to use a plug. Installing Rigid Ignite, that only have a red and black cable, no harness. Want a permanent install.

5thgenrams.com

Reverse Off Road LED Lights

Just my own spin on adding some back up lights. Most people that I've seen do this have them hanging lower than what I would prefer, or seem to be flimsy. Parts List: LED's: https://www.amazon.com/dp/B00G620ZVU/ref=cm_sw_r_cp_apa_i_4Dy7DbE582VHH U-Bolt...

5thgenrams.com

Reverse lighting upgrade

Love the Rebel EcoD and it's 25mpg around town, but one glaring (pardon the pun) inadequacy is the reverse lighting. Looked at the cube addons that some have used and the hitch receiver frame mounted lights, but wanted something less conspicuous. Settled on these and decided to mount them on...

5thgenrams.com

Auxiliary brake light

Hey guys, I'm looking at installing 2 aux reverse lights...I bought the curt 56584 harness and I need some direction on what to wire where! Each light has a black and red wire...I attached a pic! Any help is appreciated!!!! Thx

5thgenrams.com

Added some reverse lights today

Added MICTUNING Flush Mount Led 20W Flood Cree led lights for reverse lights today using the Curt 56584 and a 5 pin flat trailer side plug. No cutting into any factory wiring.

5thgenrams.com

 

[Jako]

Well this isn't a write up for reverse lights (for lower grille lights) but is to good to be lost in "what did you do to your ram today"
Post #24773

What did you do to your Ram today???

I ordered the SX version so it rotates. Got a hose anyway just to help me direct the flow. Thought about the collapsible oil bag from valvomax, but decided against it.

5thgenrams.com