5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Rear bump stop missing ?

myram2019

Well-Known Member
Joined
Nov 26, 2018
Messages
221
Reaction score
194
Points
43
Age
48
So while I was replacing the rear sway bar, I noticed that I only had one bump stop. The passenger side is missing. Is there suppose to be two of them ?

pics attached.
 

Attachments

  • 46C30A07-EBCF-4101-820A-7D0D215899AE.jpeg
    46C30A07-EBCF-4101-820A-7D0D215899AE.jpeg
    100.7 KB · Views: 71
  • A18CEF95-5829-41D0-BBDF-3F56C7FA44BD.jpeg
    A18CEF95-5829-41D0-BBDF-3F56C7FA44BD.jpeg
    107.5 KB · Views: 72
I would think so since there's a mount for one. I'm going to check mine when I get home to make sure mine are still there lol


Sent from my iPhone using Tapatalk
 
Does anyone know how i can find the part number and order one ? Thanks
 
So while I was replacing the rear sway bar, I noticed that I only had one bump stop. The passenger side is missing. Is there suppose to be two of them ?

pics attached.
Checked mine just to be sure. As expected, it was there on both sides. Your’s either fell out or was never there to begin with! You can probably purchase and install yourself, but if it was my truck I would take it to the dealer and have it replaced under warranty. Your problem may go further than just the bumper. It appears there are notches on the sides of the cup the bumper slides into. If those notches are not correctly made, then you could have it happen again. If the cup needs replacement then you definitely want the dealer involved.
 
thanks for that info. i did reach out to my salesman and am waiting to hear back.
 

Users who are viewing this thread

Back
Top