Readylift 69-1935 3.5" SST LIFT KIT not compatible with Rebel, but....

[LITTLEREBEL]

I purchased the Readylift 69-1935 3.5" SST lift kit before learning its not compatible with the Rebels extra 1" lift from the factory. Can I just swap the 3.5" pucks for 2.5" to accommodate for the difference? Has anyone done this?

​

 

[Rammit]

I created this thread when I got mine. Rebel is the same as the off-road package. Check it out. It should answer your questions.

Readylift 3.5" kit on Offroad Package

Looks awesome. What backspacing does your wheels have? Thanks man, wheels are a 20x9 +1 offset and 5 backspacing.

5thgenrams.com

 

[Hank78]

3.5 will total to 4.5 on the Rebel. This puts rim center hub to lower fender measurement greater than 25". It will not work because of the CV axle angles exceeding the range (22-25"). I did the research for mine as well. If you want to still use the kit don't add the spring spacer, just put the top spacer, not both.