RC leveling kit

[CallMeChris]

So, everyone that has the RC leveling kit and has opted to stay with stock rims....what size tires are you running without issues? Could I get away with a 275/65/20? It’s the same width as stock but 34” tall.

 

[CallMeChris]

Might play it safe and go with a 275/60/20. They make this size in a load range E Trail Grappler and a load range D General Grabber ATX so I’ll have options.

 

[ksn240]

275/65s fit just fine. I had them on my truck with stock suspension before I did my leveling kit.

 

[CallMeChris]

275/65s fit just fine. I had them on my truck with stock suspension before I did my leveling kit.

34’s with stock rims and no leveling kit? And no rubbing?

 

[robbiele]

I have 275/65 20 on my stock (no level) 2013, so I'm sure it will work fine. If you search in the forum, you will find people running 285/65 20 with 2" level

 

[robbiele]

https://5thgenrams.com/community/th...b-6’4-bed-official-longbed-thread.4769/page-2

Post #28 is a picture with 285/65 R20 with 2" leveling. Not my truck, but I think it looks good

 

[CallMeChris]

I have 275/65 20 on my stock (no level) 2013, so I'm sure it will work fine. If you search in the forum, you will find people running 285/65 20 with 2" level

I’ve been reading and searching all day, but most go with aftermarket rims. The stock rims is what had me worried.

 

[ksn240]

34’s with stock rims and no leveling kit? And no rubbing?

Aftermarket rims, but they were +10 offset vs stock +19 so pretty close. No rubbing. Had plenty of room everywhere.