Derek00127
New Member
- Joined
- Apr 6, 2021
- Messages
- 1
- Reaction score
- 1
- Points
- 1
- Age
- 58
Does anyone know how to adjust the ram box door to make a more snug fit? Thanks!
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Ram box adjustments
- Thread starter Derek00127
- Start date
UnloosedChewtoy
Ram Guru
Welcome to the forum!
It depends on your exact issue with them. For example, if its high on one end, and too low on the other, Mopar makes a tool to adjust the latch for that. There is even a STAR Online Publication about this from FCA.
If its pretty close on one, and too high/low on the other, the tool may also work (maybe).
However, if the Rambox lid is warping (common issue with them), there isn't a great solution: its replace the Rambox lid(s). My passenger side Rambox lid was warped slightly in the rear from the factory, or very shortly thereafter. As long as it still seals (it currently does), I am leaving it alone.
It depends on your exact issue with them. For example, if its high on one end, and too low on the other, Mopar makes a tool to adjust the latch for that. There is even a STAR Online Publication about this from FCA.
If its pretty close on one, and too high/low on the other, the tool may also work (maybe).
However, if the Rambox lid is warping (common issue with them), there isn't a great solution: its replace the Rambox lid(s). My passenger side Rambox lid was warped slightly in the rear from the factory, or very shortly thereafter. As long as it still seals (it currently does), I am leaving it alone.
Vinnie.
Ram Guru
my passenger side box sits outboard further than the bed. looking from the rear of the truck you can see the lip of the rambox cover, almost like it's open. it's been raining a bunch so I haven't investigated too much.
