5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Post your Rebel pics!

Not dolled up at all.

Believe it or not, the truck is black sometimes!

I'm sitting here thinking if I can survive with the Fox 2.5" lift or if I need 4".

0652a5271b32055b76a9395aef278dc5.jpg


Sent from my Pixel 5 using Tapatalk
 
Even dirty it looks good.

1ed63f2d213f88a8385ae66adcbd9288.jpg
Is it Max Steel? How does the wheel tire package ride and handle compared to stock.? I have a 19 also with 25k and my Goodyears still look new but the rubber is getting hard after four years in the Nevada sun.
 
Just picked up this 2019 Rebel with 55k miles over the weekend. It has the Level 2 equipment group, 9 speaker alpine system. bed utility group, amp running boards and I think its a retrax bed cover. I freaking love it! I am ordering exhaust soon. Probably going with the borla Atak and then will research lift options to fit 35s
 

Attachments

  • 278617749_10224134188357041_8515101097695300954_n.jpg
    278617749_10224134188357041_8515101097695300954_n.jpg
    243.2 KB · Views: 108
First picture of truck up here. But bought 1/29/22 it’s 2020 with 36k on it. Since then have added tint, Fabtech 3” coilover lift, Fuel Clash 18x9 -12 with 35x12.5 tires and a Borla type-s exhaust.

More mods to follow.
 

Attachments

  • C7D0C229-7F63-4777-AB44-AC1619AC4F5F.jpeg
    C7D0C229-7F63-4777-AB44-AC1619AC4F5F.jpeg
    158.5 KB · Views: 174
  • EBB57F44-F543-410E-A87C-A29F85695938.jpeg
    EBB57F44-F543-410E-A87C-A29F85695938.jpeg
    150.2 KB · Views: 172
18 inch Fuel Shok's with 35x12.5 Nitto Ridge Grapplers.
Are those the +1 or -12 versions. I don't want the Tires to poke out further than flush with he oem fender flares, but want to be sure the +1 fit over the brakes...
 
Are those the +1 or -12 versions. I don't want the Tires to poke out further than flush with he oem fender flares, but want to be sure the +1 fit over the brakes...
I had to do the -12 in order to air down and not rub the UCA's. Not sure if you can tell from this photo but they do stick out a bit. It couldn't be avaided.
 

Attachments

  • Clean.jpg
    Clean.jpg
    294.8 KB · Views: 110

Users who are viewing this thread

Back
Top