Post your Rebel pics!

[Vaughn]

View attachment 82784 View attachment 82786
View attachment 82797
Pismo Beach sand dunes.
Gotta love California

Nice... I need to find a friend with a drone... ;-)

 

[Vaughn]

Ridge Grapplers. No more white letters. View attachment 82808
View attachment 82809

What's wrong with white letters?

 

[Vinnie.]

What's wrong with white letters?

yeah,,, white letters matter too! right?

 

[Vaughn]

yeah,,, white letters matter too! right?

No, not saying they matter... I like them... Where are you trying to go with this?

 

[Vinnie.]

No, not saying they matter... I like them... Where are you trying to go with this?

i donno just making topical banter online after a long day of work.

 

[RebelRam19]

These look great, they aren't

Just had fuel diesel wheels and nitto tires installed yesterday. Went with 285 65 R20 tires on Fuel Diesel 20x9 1’ offsets. View attachment 80074 View attachment 80075 View attachment 80076 View attachment 80077

These aren't black right? Tinted dark bronze-ish? They look spectacular.

 

[Kibro2]

These look great, they aren't


These aren't black right? Tinted dark bronze-ish? They look spectacular.

Appreciate it… they are machined dark tint which I really like better than black painted. Thanks

 

[RamRebelSteel]

Snow day edit

 

[ChadT]

Added metallic blue letters front and back, and Falcon Terraflex shocks!
They're on the +1in setting

 

[SiRay6]

Finished my wrap. Avery Dennison satin dark gray.

Addictive Desert Design Front Bumper with Baja Design Onyx 6 and Smittybilt X20 Winch (the ADD bumper was only tested with Smittybilt and another brand - I wanted a Warn). I also installed 3.5" round generic Amazon fog lights. May switch to Baja Design S1 in the near future for a wide beam.

The front got lower with the bumper (approx 100 lbs) and the winch (almost 100 lbs). I need to lift the front...thinking about Bilstein 6112's?

 

[RamRebelSteel]

Finished my wrap. Avery Dennison satin dark gray.

Addictive Desert Design Front Bumper with Baja Design Onyx 6 and Smittybilt X20 Winch (the ADD bumper was only tested with Smittybilt and another brand - I wanted a Warn). I also installed 3.5" round generic Amazon fog lights. May switch to Baja Design S1 in the near future for a wide beam.

The front got lower with the bumper (approx 100 lbs) and the winch (almost 100 lbs). I need to lift the front...thinking about Bilstein 6112's?

Nice! Just need some aggressive wheels to go with that aggressive bumper! How did u mount those pods? The 6112's are good for the money.

 

[SiRay6]

Nice! Just need some aggressive wheels to go with that aggressive bumper! How did u mount those pods? The 6112's are good for the money.

Thanks! Yes wheels are definitely something I want to get in the near future. The fog lights? I just took my time to aim them and drilled a hole through the bottom of the bumper. I tapped into the stock fog light harness so they are controlled by the stock fog light switch. I got 3.5" led fogs off Amazon but they are spot pattern and not as good. The Baja Design S1 wide beam look good and are smaller so they should work better.

Good to know about the 6112's. Thanks.

Raymond

 

[Boost Monkey]

Rebel 12A
2” ReadyLift level w/UCA’s
18”x9” Method NV605 et-12 wheels
35x12.5 R18 Nitto Trail Grappler M/T tires
Mopar aluminum off-road running boards
TRX style triple orange LEDs (we don’t have to say “Raptor style” anymore )
‘Found some grey caps’ front license plate holes delete
Matte black ‘RAM’ vinyl covers on grille
Some other small mods etc

 

[NewLove]

View attachment 83470
View attachment 83471
View attachment 83472

Rebel 12A
2” ReadyLift level w/UCA’s
18”x9” Method NV605 et-12 wheels
35x12.5 R18 Nitto Trail Grappler M/T tires
Mopar aluminum off-road running boards
TRX style triple orange LEDs (we don’t have to say “Raptor style” anymore )
‘Found some grey caps’ front license plate holes delete
Matte black ‘RAM’ vinyl covers on grille
Some other small mods etc

Awesome! Which TRX style lights?


Sent from my iPhone using Tapatalk

 

[silverWS6]

View attachment 83470
View attachment 83471
View attachment 83472

Rebel 12A
2” ReadyLift level w/UCA’s
18”x9” Method NV605 et-12 wheels
35x12.5 R18 Nitto Trail Grappler M/T tires
Mopar aluminum off-road running boards
TRX style triple orange LEDs (we don’t have to say “Raptor style” anymore )
‘Found some grey caps’ front license plate holes delete
Matte black ‘RAM’ vinyl covers on grille
Some other small mods etc

I want 35's so bad! That looks beefy!

 

[Boost Monkey]

I want 35's so bad! That looks beefy!

So, I literally looked at the manufacturer specs for many, many 35x12.5 tires out there (both A/T — but more aggressive A/T’s, and M/T) and this Nitto TG MT is one of, if not the biggest 35x12.5 out there by actual measured specs.

Most 35x12.5 are actually like 34.5-34.8 and most are listed at exactly 12.5 width. Same with the A/T’s. These Nitto’s are listed at 35.04” and 13.39” width...

The downside (besides cost): most 35x12.5 weigh about 72-78lbs... These Nittos weigh like 81lbs. That’s a heavy asz tire.

Awesome! Which TRX style lights?


Sent from my iPhone using Tapatalk

You mean like, which actual lights did I buy?

 

[NewLove]

So, I literally looked at the manufacturer specs for many, many 35x12.5 tires out there (both A/T — but more aggressive A/T’s, and M/T) and this Nitto TG MT is one of, if not the biggest 35x12.5 out there by actual measured specs.

Most 35x12.5 are actually like 34.5-34.8 and most are listed at exactly 12.5 width. Same with the A/T’s. These Nitto’s are listed at 35.04” and 13.39” width...

The downside (besides cost): most 35x12.5 weigh about 72-78lbs... These Nittos weigh like 81lbs. That’s a heavy asz tire.




You mean like, which actual lights did I buy?

Yes... Thank you!


Sent from my iPhone using Tapatalk

 

[Mate514]

You mean like, which actual lights did I buy?

That is what I would like to know

 

[wlay00]

I finally decided to pull the trigger on some wheel/tires. It may just be me, but I couldn't stand the look of the stock wheels any longer (not a fan of the machine finish). I blame this forum for showing me how dope you can make a rebel look haha. I couldn't believe how expensive all the places around me were wanting for Nitto Ridge Grapplers (35x12.5r18). Average selling price was $400-$450 a tire. I randomly checked amazon and they had them for $337 a tire. They just came in and thought I would share. My wheels will be here Tuesday.

 

[Eltaco]

I finally decided to pull the trigger on some wheel/tires. It may just be me, but I couldn't stand the look of the stock wheels any longer (not a fan of the machine finish). I blame this forum for showing me how dope you can make a rebel look haha. I couldn't believe how expensive all the places around me were wanting for Nitto Ridge Grapplers (35x12.5r18). Average selling price was $400-$450 a tire. I randomly checked amazon and they had them for $337 a tire. They just came in and thought I would share. My wheels will be here Tuesday.

Those look great, nice find on the price! Curious what install ends up costing you.

Im curious if anyone has had their factory Rebel wheels powder coated? I actually like the wheel pattern quite a bit, but also not a huge fan of the machined look. Actually, I’ve been looking for dark gray colored wheels for my black Ram.