Post your Rebel pics!

[BigBuss54]

What hitch are you using? I have a Gen Y but I need to buy weight distribution and havnt decided yet. I have a similar rebel and will be towing a 28 or so foot toy hauler around that 6k weight mark and would love to help the truck stay more level even if not needed

I have the Camco Eaz-Lift distribution hitch. I bought the bigger one just to be safe. I have no issues with the hitch. My camper is a 30 foot at 6,200 pounds. Rebels are only rated for air 7,200 pounds. So I’m pushing my limits. I did buy Sumo springs to help with the bounce and sway when going over bumps. The Sumo springs help big time with the control of the truck while towing. But when not hooked up to the camper it’s a bumpy stiff ride. I’m thinking about taking them off and buying the Timbren brand ones. Easy to take off and put on in 5 minutes. The Sumo springs you need to bolt on and is a bit of a pain in the ***.

 

[Rsone 11]

Eibach protruck kit rides great 18x9 -12 fuel rebel wheels with nitro ridge grapplers
Also debadged all the badges I could only left the ram in the front grill and on tailgate.

 

[1BADRAMLIMITED]

Eibach protruck kit rides great 18x9 -12 fuel rebel wheels with nitro ridge grapplers
Also debadged all the badges I could only left the ram in the front grill and on tailgate.

PICTURES??

 

[Rsone 11]

Eibach protruck kit rides great 18x9 -12 fuel rebel wheels with nitro ridge grapplers
Also debadged all the badges I could only left the ram in the front grill and on tailgate.

 

[boogielander]

i see nada...
unless it's the type of pic that only smart people can see...

 

[Rsone 11]

For some reason it’s telling me all my picture files are too large and it won’t upload them

 

[boogielander]

For some reason it’s telling me all my picture files are too large and it won’t upload them

if you're on PC look up windows photo resizer.
install that, right click on the photo, look for "resize" and then do "large" and it will be fine!

 

[Belvedere]

Eibach protruck kit rides great 18x9 -12 fuel rebel wheels with nitro ridge grapplers
Also debadged all the badges I could only left the ram in the front grill and on tailgate.

Loaded fine for me.

 

[CaliRebel]

Decided to crash a Cars n Coffee meet by bringing my polar bear
Also tried out this polaroid filter that looks pretty cool

 

[ayoslickxd]

new front driveshaft haha

 

[Waterfowler41]

Spent the weekend at Notre Dame for a hockey showcase, the remote lot was pretty cool.

 

[Belvedere]

Spent the weekend at Notre Dame for a hockey showcase, the remote lot was pretty cool.

Love the topographic. I'm very tempted to get the hood version...

 

[CG07SUT]

Finally had a decent day to take a pic, been raining or snowing since I picked it up a couple weeks ago. 2024 Level 2. Added a 2.5/1.5, Arms, 18x9 and some 35’s (325-65-18 BFG’s).

 

[CG07SUT]

Thanks for the likes, it will be a work in progress. There are many outstanding trucks in here. Coming over from the Jeep/Gladiator realm, those platforms were so well supported by the aftermarket, finding it more challenging to source parts to set the new truck up the way I want. The Gladiator was lifted on 37’s, I had lighting set the way I needed/used, had a winch, on-board air and hoped to set this up similar. Thus far it seems like without changing the bumper, options are Vice, Swarfworks or custom fab a winch mount, not sure that I want the front receiver hitch option as it would again require custom install to avoid the low-hanging bolt-ons. I may not take this one on the trails that I took the Wranglers or Gladiator on, but I am the kind that is prepared should I want/need to.

 

[1BADRAMLIMITED]

Finally had a decent day to take a pic, been raining or snowing since I picked it up a couple weeks ago. 2024 Level 2. Added a 2.5/1.5, Arms, 18x9 and some 35’s (325-65-18 BFG’s).

What rims are those?

 

[silverWS6]

What rims are those?

Looks like these

Fuel 1-Piece Wheels Vector - D579 Wheels

Fuel Off-Road has been capturing the attention of off-road enthusiasts with our cutting edge designs, fitments, and technological advancements. Fuel Off-Road manufactures the most advanced off-road wheels, offering the latest in design and engineering innovations on the market.

www.fueloffroad.com

 

[1BADRAMLIMITED]

Looks like these

Fuel 1-Piece Wheels Vector - D579 Wheels

Fuel Off-Road has been capturing the attention of off-road enthusiasts with our cutting edge designs, fitments, and technological advancements. Fuel Off-Road manufactures the most advanced off-road wheels, offering the latest in design and engineering innovations on the market.

www.fueloffroad.com

That looks right thanks.

Pulling the trigger soon on some wheels and still conflicted. I have 5 carts loaded ready to go but can not make up my mind.

 

[silverWS6]

That looks right thanks.

Pulling the trigger soon on some wheels and still conflicted. I have 5 carts loaded ready to go but can not make up my mind.

I've changed my wheels twice and I'm about to jump into my third set. Thinking of going with KMC this time around, in dark blue or silver.

 

[Belvedere]

I was thinking about new wheels this spring, but the only wheel I was interested in doesn't seem to be available anymore. Level 8 MK6. Everything else is just too busy for me. May just go against my better judgement and get spacers. Fuel does have some decent options though.

 

[cliffsta]

First wash of 2024. Not perfect but good enough. Also did the interior, including vacuuming under floor mats and treating the leather seats to some maguires.