Plugs for bed?

[Ram/Tun]

Do any of you know if there are any available plugs for this rear two opening on the bed. Got it brand new and looking forward to have some plugs. Not sure if all rams came like this or not?

Sent from my SM-G975U using Tapatalk

 

[LaxDfns15]

There's a thread on it where people have bought things to cover them. There are some on Amazon for $25-ish that are 3D printed. I have a 3D printer so I might take some measurements to print my own. There are also some that have tie down hooks built in, but they're more expensive.

 

[mikeru82]

Why did you flock your truck?

Sorry, couldn't resist.

 

[drstein]

A thread on this in just the past couple of weeks. Try searching?

 

[Jako]

ebay FYI

Stake Pocket Hole Covers Caps Plugs 2019-2022 Ram Bed Rail Accessories Set of 2 | eBay

They require a different cover. See pictures. Two covers are included in the set. One for the left rail stake pocket and one for the right rail stake pocket. NEW 2019-2022 Ram Bed Rail Stake Pocket Covers.

www.ebay.com

 

[rxit]

Another option for the stake pockets are retractable bull rings. I installed these on mine. It was pretty straightforward. I used a dremel instead of buying there router blade and bit for the install.

https://www.bullringusa.com/product/gunmetal-flush-fit-tie-down-anchors-19-20-dodge/

 

[Ram/Tun]

Why did you flock your truck?

Sorry, couldn't resist.

Thanks for input and valuable information

Sent from my SM-G975U using Tapatalk

 

[Ram/Tun]

A thread on this in just the past couple of weeks. Try searching?

I'm new on here and very sorry that my question disturb you. I guess we all need to learn. Anyway nice welcoming.
Thanks!

Sent from my SM-G975U using Tapatalk

 

[Ram/Tun]

There's a thread on it where people have bought things to cover them. There are some on Amazon for $25-ish that are 3D printed. I have a 3D printer so I might take some measurements to print my own. There are also some that have tie down hooks built in, but they're more expensive.

Thanks a lot,

Sent from my SM-G975U using Tapatalk

 

[drstein]

I'm new on here and very sorry that my question disturb you. I guess we all need to learn. Anyway nice welcoming.
Thanks!

Sent from my SM-G975U using Tapatalk

Not "disturbed at all. Stating there was a very recent thread covering all of that and that a search may locate it

 

[Ram/Tun]

Not "disturbed at all. Stating there was a very recent thread covering all of that and that a search may locate it

Thanks

Sent from my SM-G975U using Tapatalk

 

[Glenn54]

See if this thread has anything you're looking for.

What is everyone using for stake pocket hole covers

So what stake hole pocket covers are you using to cover up the rear pocket holes in your 2019/2020 Truck.

5thgenrams.com

 

[TexasDrone]

There's a thread on it where people have bought things to cover them. There are some on Amazon for $25-ish that are 3D printed. I have a 3D printer so I might take some measurements to print my own. There are also some that have tie down hooks built in, but they're more expensive.

Anyway of 3D Printing some sort of cover for this remote. See other remote example.

Sent from my iPhone using Tapatalk

 

[Rick J]

Do any of you know if there are any available plugs for this rear two opening on the bed. Got it brand new and looking forward to have some plugs. Not sure if all rams came like this or not?

Sent from my SM-G975U using Tapatalk

Here's what I used. They fit great.

Stake Pocket Hole Covers

163287135098

$22.50

Ebay

https://www.ebay.com/itm/Stake-Pock...m-Bed-Rail-Accessories-Set-of-2-/163287135098

 

[TxRancher]

I think it depends upon the bed rail covers that came with your truck. My 2021 covers those holes. But, I do have 32, yes, 32 holes ranging in size from 1/4" to 3/4", 16 on each side. It looks like they are for an optional rail system that accommodates a sliding shelf unit. The tech that did my aftermarket spray in bedliner was supposed to cover them up. He didn't. Now I have to source snap in plugs.

 

[Nukegm426]

I think it depends upon the bed rail covers that came with your truck. My 2021 covers those holes. But, I do have 32, yes, 32 holes ranging in size from 1/4" to 3/4", 16 on each side. It looks like they are for an optional rail system that accommodates a sliding shelf unit. The tech that did my aftermarket spray in bedliner was supposed to cover them up. He didn't. Now I have to source snap in plugs.

It’s for the bed utility group... they all have the holes. It’s easy to add yourself if you decided to.

 

[Nukegm426]

I used these, and I’m glad I did. Recently added a backflip to mine and having these block the holes really cleans up the overall look.

 

[TxRancher]

Thank you for the info. I went to Lowes and bought push in fasteners and inserted them in the holes. Looks a lot better and I can easily remove if I decide to add any bed options later.