Pics after Bora Spacer install

[Captain Stack]

I installed 1.5 inch Bora spacers on the front and 2 inch Bora spacers on the rear of my 2019 Limited. Here are some pics.

 

[Talpa]

Why the different widths

 

[Captain Stack]

Why the different widths

Always want the rear a little wider. It's just a matter of preference.

 

[Chippy]

Exactly what I did with my Rebel. So much better stance. Couldnt stand seeing rear wheels narrower than the fronts just looked wrong..

 

[Eltaco]

1/4” thicker rear should be even, from what I have measured. Actually, my truck measured about 3/8” wider at front than back.

OP, are those tires the same width as factory?

 

[NC Rebel]

That looks pretty nice ! Here's a pic of mine with 2 inch bora spacers front an rear.

 

[Eltaco]

That looks pretty nice ! Here's a pic of mine with 2 inch bora spacers front an rear.

Those are stock wheels and tires? Man, every time I see a picture I change my mind in how big a spacer I want to go! Those look really good from that angle!

Do you have any pics of the truck straight on from front and back?

Also, stock rise height or do you have a lift?

 

[NC Rebel]

Those are stock wheels and tires? Man, every time I see a picture I change my mind in how big a spacer I want to go! Those look really good from that angle!

Do you have any pics of the truck straight on from front and back?

Also, stock rise height or do you have a lift?

Stock wheels and tires no lift . I'll try and snap a couple pics from the front for ya .

 

[Eltaco]

Stock wheels and tires no lift . I'll try and snap a couple pics from the front for ya .

I caved and just ordered 2 1.5” and 2 1.75”. Sounds like about 2wks for the parts + shipping time. Looking forward to getting them on the truck!

 

[NC Rebel]

Sorry for the delay, here's a couple more.

 

[NJC1684]

I caved and just ordered 2 1.5” and 2 1.75”. Sounds like about 2wks for the parts + shipping time. Looking forward to getting them on the truck!

Expect at least a month! I haven't yet received those I mentioned that were ordered the first week of March. Another fellow Ram owner just received his last week that were ordered the second or third week of February.

 

[Eltaco]

Expect at least a month! I haven't yet received those I mentioned that were ordered the first week of March. Another fellow Ram owner just received his last week that were ordered the second or third week of February.

Ugh, that’s a buzz-kill.

I guess I’m looking at a month or more before I can share any pics

 

[NJC1684]

Ugh, that’s a buzz-kill.

I guess I’m looking at a month or more before I can share any pics

Mine shipped out today! lol

 

[Eltaco]

Mine shipped out today! lol

I’d love to get your opinion on them once you trial the set! With a month of lead time, I may have an opportunity to update my order still, haha!

Haven’t seen enough information to feel 100% confident in my decision on spacer thickness, so curious to hear your thoughts.

 

[NJC1684]

I caved and just ordered 2 1.5” and 2 1.75”. Sounds like about 2wks for the parts + shipping time. Looking forward to getting them on the truck!

Wasn't sure if you seen post 1,173 or not (1.25/1.50)

2019+ Rams with Lifts/Levels, and/or aftermarket wheel tire setups

did you put a red led in the 3rd brake light to help the red color come thru the smoked tint ... Naw i have a white led in there. I replaced them prior to getting it smoked.

5thgenrams.com

 

[Eltaco]

Wasn't sure if you seen post 1,173 or not (1.25/1.50)

2019+ Rams with Lifts/Levels, and/or aftermarket wheel tire setups

did you put a red led in the 3rd brake light to help the red color come thru the smoked tint ... Naw i have a white led in there. I replaced them prior to getting it smoked.

5thgenrams.com

Thanks, hadn’t seen it.


The more pics I see, the more confused I am. Those ones look like they stick outside the fenders a ways. They’re roughly 0.5” wider tire and the sidewalk looks basically vertical on those tires as compared to my Duratracs on 18s. Guess we will just wait and see what happens with the 2”...

 

[Caballonegro]

PERFECT!

 

[frybel]

Exactly what I did with my Rebel. So much better stance. Couldn't stand seeing rear wheels narrower than the fronts just looked wrong..

@ Chippy and Captain Stack...or I guess anyone for that matter. Is there any negative impact to tire wear, handling, etc.. running 1.5 in the front and 2 in the back. I love the look of NC's 2" all the way around, but now you two have me liking the idea of wider in the rear...so many choices!!