Passive Entry On Bighorn

[Sean66]

Another successful passive entry install on a Bighorn. Used the harnesses from Jimmy07, definitely the way to go and he does good work, thanks Jimmy. After doing this mod I don’t see any reason why you would not want to just remove the whole latch assembly with the carrier plate, it was pretty easy and makes running the harness a snap. Out of the 10 settings to change in Alfa OBD there were only like 4 that weren’t set to what they should be.

So far I’ve installed the Mopar full rear fender liners, passive entry, a bedrug, 20” factory chrome rims (from eBay), running boards, and a hard tonneau cover. Next is the sensor for rain sensing wipers which I already have but haven’t installed yet. Will probably add the factory bed lighting and integrated trailer brake controller eventually.

Ram on!

 

[Knight.]

I need to add passive entry to my 21 Ram 1500 Bighorn Night Edition. How can I do this? Is there a tutorial with the part numbers I need?

Thanks

 

[mcosub]

I need to add passive entry to my 21 Ram 1500 Bighorn Night Edition. How can I do this? Is there a tutorial with the part numbers I need?

Thanks

It’s on here, just search for it.

 

[SCasey89]

Adding Passive Entry: How-to

If you've seen the original thread on adding passive entry, HERE, you are likely well aware of the issues with getting it to work on the newer trucks that didn’t come with it from the factory. This thread will walk you through getting it to work on the 5th gen DT’s (and the HD trucks) just as it...

5thgenrams.com