My front park sensors never worked in my 19 bighorn, the dealer said my #4 sensor is shorted to ground and quoted me $500 to replace it. I bought an OEM sensor and replaced it myself and it still doesn’t work. Does it need recalibrated or reset at the dealer?
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
ParkSense needs service
- Thread starter Goss3521
- Start date
vincentw56
Spends too much time on here
- Joined
- Aug 5, 2020
- Messages
- 3,391
- Reaction score
- 2,350
No, it doesn't need calibration or reset. Your harness is probably shorted.
"calibration not required" according to AlldataDIY.
I highly recommend Advanced DIY Automotive Repair | ALLDATA DIY
Ok thanks, I kinda figured something else was going on with it
Update, at the multi wire plug on the left frame rail I found the harness rubbed through, repaired the wiring and it still doesn’t work. My next try is to drop the bumper and remove the harness completely
