5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Paint Peeling

Gabby2019Ram

Member
Joined
Apr 30, 2023
Messages
14
Reaction score
1
OMG I'm about to lose my mind 🤯🤯🤬 2019 Bighorn peeling seems like it won't stop
 

Attachments

  • 20230926_114052.jpg
    20230926_114052.jpg
    132.2 KB · Views: 58
  • 20230926_114034.jpg
    20230926_114034.jpg
    160.2 KB · Views: 57
  • 20230926_114020.jpg
    20230926_114020.jpg
    143 KB · Views: 56
  • 20230926_114013.jpg
    20230926_114013.jpg
    189.5 KB · Views: 57

Wirerat

Active Member
Joined
Apr 18, 2021
Messages
118
Reaction score
120
You using the high pressure car wash often?

That surface under the paint doesn't look properly prepped.
 

Gabby2019Ram

Member
Joined
Apr 30, 2023
Messages
14
Reaction score
1
You using the high pressure car wash often?

That surface under the paint doesn't look properly prepped.
I only pressure wash the wheel walls and undercarriage the rest of the truck is hand washed.
 

BowDown

Spends too much time on here
Joined
Mar 20, 2020
Messages
3,426
Reaction score
3,557
Location
Frisco TX
I pressure wash my entire truck everytime I wash it and dont have that. That part was repainted at some point with crap surface prep
 

HemiDude

Spends too much time on here
Joined
Jul 5, 2020
Messages
2,595
Reaction score
2,231
Location
Ohio
Was that panel ever repaired or painted? Especially right under the headlight, it does look like poor prep or repair.
 

vincentw56

Spends too much time on here
Joined
Aug 5, 2020
Messages
3,263
Reaction score
2,292
Since it is plastic could be too much flex, paint not mixed right for flexing, or any other issue. You can replace it pretty easy and I do believe you can get it already painted from the parts department.
 

Gabby2019Ram

Member
Joined
Apr 30, 2023
Messages
14
Reaction score
1
I pressure wash my entire truck everytime I wash it and dont have that. That part was repainted at some point with crap surface prep
No never been painted had it since it had 20 miles on it ,no accidents or body damage. It started out small then when we got this tropical storm on Saturday that's what it looked like afterwards.
 

Gabby2019Ram

Member
Joined
Apr 30, 2023
Messages
14
Reaction score
1
Since it is plastic could be too much flex, paint not mixed right for flexing, or any other issue. You can replace it pretty easy and I do believe you can get it already painted from the parts department.
It don't feel like it's plastic when I touch it or fiberglass but I'm going to take it by National Dodge on Saturday.
 

BowDown

Spends too much time on here
Joined
Mar 20, 2020
Messages
3,426
Reaction score
3,557
Location
Frisco TX
Yes, part of installing the surround view cameras was removing those to remove the grill to install the front camera.

Same here except I was replacing the front camera

 

Gabby2019Ram

Member
Joined
Apr 30, 2023
Messages
14
Reaction score
1
Its plastic, had mine off before. When its on the truck it feels very solid because of all the attachment points
Ok maybe I can take it off clean it sand , prime and repaint it. Thanks
 
Last edited:

Users who are viewing this thread

Site Vendors

https://www.jasonlewisautomotive.com/

Members online

Top