My new to me 2022 1500 5.7 non e-torque popped a p219a code on my scanner. Truck has 33100 miles. Didn’t feel any change in performance or hear any abnormal engine sound related. I cleared it and it hasn’t come back yet within 15 miles of highway driving. I use regular 87 octane not sure if it’ll set that specific code. Should I bring it in for warranty or try higher octane fuel? Don’t want to get a loaner from dealer unless necessary
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
P219A
- Thread starter Dep$
- Start date
1791
Ram Guru
- Joined
- Nov 9, 2023
- Messages
- 893
- Reaction score
- 705
- Points
- 93
- Age
- 55
many run 87 the manual recommends 89. i ran 87 and on hot day's i could hear knock under load that being said i don't think octane is your issue but i would not run anything lower than 89.
any ticking? worst case is bad lifter and that will suck but it would/should be covered under warrantee
any ticking? worst case is bad lifter and that will suck but it would/should be covered under warrantee
Last edited:
So no ticking or engine noise that I hear. Im very OCD with my engines between stock ones and built engines I’ve raced and maintained. I’ll double check for any noises later tonight when I head out. I’m hoping it’s not a lifter issue yet with such low miles but it happens. If the light comes back I’ll have to make an appointment with the dealer.
