AustralianFreeRider
New Member
- Joined
- Jan 17, 2024
- Messages
- 2
- Reaction score
- 0
- Points
- 1
- Age
- 41
Hi all - need some desperate help please!
My 2020 RAM Rebel 1500 5.7 HEMI non Etorque is throwing P0107 Manifold Absolute Pressure and my nearest dealer is 3hrs drive away - the truck isnt running correctly (sluggish throttle - almost like its in limp)
I've tried the following all to no resolution.
I have a SGW Bypass and have tried to clear the code with AlpahOBD but it just won't clear - I've attached the Log from AlpahOBD.
I have verified my bypass works by making other changes in Alpha so unsure why it wont clear the DTC, I was under the impression I could clear every code and it would come back if the issue is not resolved however this one comes on with ignition and just cant be cleared?
Has anyone seen anything similar that could offer any insight - im literally at the end of my rope!
My 2020 RAM Rebel 1500 5.7 HEMI non Etorque is throwing P0107 Manifold Absolute Pressure and my nearest dealer is 3hrs drive away - the truck isnt running correctly (sluggish throttle - almost like its in limp)
I've tried the following all to no resolution.
- Replaced MAP sensor
- Tested Battery and swapped with another - no effect
- Replaced air cleaner
- MAP connector has 4.95 Volts with ignition on
- No visible Vaccum Leaks
I have a SGW Bypass and have tried to clear the code with AlpahOBD but it just won't clear - I've attached the Log from AlpahOBD.
I have verified my bypass works by making other changes in Alpha so unsure why it wont clear the DTC, I was under the impression I could clear every code and it would come back if the issue is not resolved however this one comes on with ignition and just cant be cleared?
Has anyone seen anything similar that could offer any insight - im literally at the end of my rope!