Options for 4x2 4 inch lift kit 2020 ram limited?

[azram520]

Anyone done one?
What are my options for lifting this up a bit?

Thanks,
Chris

 

[Jo35]

For a 2wd... you have the perfect option: CST 4" Spindle Lift. That, extended front brake lines, some 2" spacers in the rear, and extended rear shocks and you're golden.

 

[ScottChurch]

I have a 2wd and I decided to do a 3.5” lift using a variety of parts that I paired together.

I would either do a 3.5” lift or go the spindle route as said above.

 

[azram520]

Thanks for the suggestions. This would be the first truck I lifted. I admit im more of a grocery get-er. But I do like the raised stance! At the time of purchase covid was in full effect, I couldnt find a limited 4x4 for under 67k in stock. I got this bad boy for low 50's and been super happy.

 

[azram520]

For a 2wd... you have the perfect option: CST 4" Spindle Lift. That, extended front brake lines, some 2" spacers in the rear, and extended rear shocks and you're golden.

Sounds like this is the kit?

19-24 Ram 1500 2wd* 4″ Suspension System / Stage 1 – California Supertrucks Inc

2019+ Ram 1500 2wd* / 4 Suspension System CSS-D1-8 4 LIFT SPINDLES CSS-D11-3 STAINLESS STEEL BRAKE LINE KIT CSS-D16-3 1.5 REAR SPACER KIT *Does not fit on trucks with factory 22 wheels

cstsuspension.com

Looks like I will have to get rid of my stock 22's though. I dont see anything about it working with air suspension or not. So I assume its fine?

 

[azram520]

I have a 2wd and I decided to do a 3.5” lift using a variety of parts that I paired together.

I would either do a 3.5” lift or go the spindle route as said above.

What parts did you roll with? You got air?

 

[Ellisstrong]

Sounds like this is the kit?

19-24 Ram 1500 2wd* 4″ Suspension System / Stage 1 – California Supertrucks Inc

2019+ Ram 1500 2wd* / 4 Suspension System CSS-D1-8 4 LIFT SPINDLES CSS-D11-3 STAINLESS STEEL BRAKE LINE KIT CSS-D16-3 1.5 REAR SPACER KIT *Does not fit on trucks with factory 22 wheels

cstsuspension.com

Looks like I will have to get rid of my stock 22's though. I dont see anything about it working with air suspension or not. So I assume its fine?

Does the bds 4” kit for air ride trucks not work on 4x2’s?

 

[ScottChurch]

What parts did you roll with? You got air?

No, my truck did not have air from the factory. I used the following parts; of course these don’t apply if you’re an air ride equipped truck.


Mopar UCA (same ones the Mopar lift):
Right 68323530AA
Left 68323531AA

Mopar ORP Front Springs:
Right: 68320250AB
Left: 68320249AC

Motofab 2” Front Leveling Kit: DR-2

Motofab 2” Rear Lift Kit: DR-2R

Rough Counutty Rear Shocks: 23161_J